Category
- Academic DIY Kits
- Academic Hobby Projects
- Academic Major Projects
- Academic Minor Projects
- Aeromodelling & Drone
- Development Boards
- Electronics- Active Parts
- Electronics- Passive Parts
- Electronics- Sensors
- Electronics– Accessories
- Electronics–Modules
- Mechanical Parts
- Motor, Actuator & Pump
- Robot Accessories
- Supply- Battery, Adopters
- Tools & Equipment
Filter by price
Top rated products
-
Arduino Pro Mini Atmega328p (Without Cable)
₹250.00₹190.00 -
Color Sensor Module TCS230, 3V-5V Red
₹389.00₹350.00 -
DC Motor (3~12) Volt DC Round Shape
₹100.00₹90.00 -
L298N Motor Driver Dual H-Bridge IC
₹190.00₹150.00 -
Hydraulic Actuated Arm Using Syringe ₹4,500.00
Category: Electronics--Modules
Electronics--Modules
Showing 1–24 of 72 results
-
1 Channel 5Volt Relay Module
₹95.00₹80.00Add to cartThis is a 5V, Single Channel Relay interface board; it’s useful to control various appliances, and other equipment’s with large current. It can be controlled directly by any Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, ARM, DSP, MSP430). Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or …
-
16 Channel 5V Relay Module
₹845.00₹745.00Add to cartThis is a 5V, Single Channel Relay interface board; it’s useful to control various appliances, and other equipment’s with large current. It can be controlled directly by any Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, ARM, DSP, MSP430). Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port, or …
-
16×2 Character LCD Display
₹140.00₹120.00Add to cartA 16×2 LCD means it can display 16 characters per line and there are 2 such lines. In this LCD each character is displayed in a 5×7 pixel matrix. This LCD has two registers, namely, Command and Data. The command register stores the command instructions given to the LCD. A command is an instruction given to …
-
2 Channel 5V Relay Module
₹180.00₹165.00Add to cartThis is a 5V, Single Channel Relay interface board; it’s useful to control various appliances, and other equipment’s with large current. It can be controlled directly by any Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, ARM, DSP, MSP430). Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port, or …
-
2.4GHz NRF24L01 + PA + LNA SMA Wireless Transceiver Antenna
₹335.00₹280.00Add to cartThe NRF24L01 module is the latest in RF modules. This module uses the 2.4GHz transceiver from Nordic Semiconductor, the NRF24L01+. This transceiver IC operates in the 2.4GHz band and has many new features! Take all the coolness of the nRF2401A and add some extra pipelines, buffers, and an auto-retransmit feature – very nice! This board …
2.4GHz NRF24L01 + PA + LNA SMA Wireless Transceiver AntennaRead More
-
4 Channel 5V Relay Module
₹280.00₹240.00Add to cartThis is a 5V, Single Channel Relay interface board; it’s useful to control various appliances, and other equipment’s with large current. It can be controlled directly by any Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, ARM, DSP, MSP430). Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port, or …
-
4*4 16 Key Matrix Membrane Switch Keypad Keyboard
₹105.00₹85.00Add to cartThis DC 4×4 Matrix Keypad Membrane Switch is a high-quality soft-touch feeling button keypad with 100 million life-stroke lifespans and good resistance to environmental conditions. This DC 4×4 Key Matrix Membrane Switch Keypad is a high-quality product at a very low cost for your application needs. This 16-button keypad provides a useful human interface component for microcontroller …
-
4×3 Membrane Switch Keypad
₹105.00₹80.00Add to cartThis DC 12V 4×3 Matrix 12 keys Membrane Switch Keypad is high-quality soft touch feeling button keypad with 100 million life-stroke lifespans and good resistance to environmental conditions. This DC 12V 4×3 Key Matrix Membrane Switch Keypad is a high-quality product at very low cost for your application needs. This 12-button keypad provides a useful human interface component for …
-
5V Step-Up Power Module Lithium Battery Charging Protection Board USB (134N3P)
₹125.00₹110.00Add to cart5V Step-Up Power Module Lithium Battery Charging Protection Board USB For DIY Charger 134N3P Lithium Battery Charging Protection Board Boost Converter LED Display USB For DIY Charger 134N3P High-Quality USB iron with Cheap display port video card and Integrated Circuits. Technical Specification: BAT Discharging Stop Voltage: 2.9V. Discharging Efficiency:85%(input 3.7V output 5V/1A). Charging and discharging indication. Internally installed …
5V Step-Up Power Module Lithium Battery Charging Protection Board USB (134N3P)Read More
-
650nm 6mm Mini Laser Dot Diode
₹60.00₹55.00Add to cartOne Piece of new 650nm 5mW Laser Red Dot Module Red Copper Head Red Laser Diode Pointer Sight. A module can be used with Arduino, M bed, ARM or any other MCU Technical Specifications: Working life: more than 2000 hours Spot mode: dot facula, continuous output Laser wavelength: 650nm (Red) Copper Head Diameter is 6mm …
-
8 Channel 5V Relay Module
₹425.00₹410.00Add to cartThis is a 5V, Single Channel Relay interface board; it’s useful to control various appliances, and other equipment’s with large current. It can be controlled directly by any Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, ARM, DSP, MSP430). Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port, or …
-
A4988 Stepper Motor Driver Module with Aluminum Heat Sink
₹240.00₹180.00Add to cartA4988 is a complete micro-stepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed …
A4988 Stepper Motor Driver Module with Aluminum Heat SinkRead More
-
Adapter Board For NRF24L01 Wireless Module
₹90.00₹80.00Add to cartHaving problem interfacing nrf modules to your 5 volt microcontroller? Then use this Nrf24l01 breakout board which just solves the problem for interfacing nrf24l01 modules with your Arduino or any microcontroller. Technical Specifications : Voltage: 5 Volts It’s for 8 Pin NRF24L01+ Module A simple socket board which is for NRF24L01 wireless module On-board AMS1117-3.3 …
-
ADXL335 – Triple Axis Linear Accelerometer
₹270.00₹260.00Add to cartADXL335 is a Breakout board based on 3 axis ADXL335 IC from Analog Devices. The Accelerometer Module require no external devices and works on 5V power supply. It can be directly interfaced to ADC of a microcontroller without any external components. This module can be used to sense motion or tilt(in case of non-moving) in …
-
ADXL345 – Triple Axis Linear Accelerometer
₹125.00₹120.00Add to cartADXL345 is a Breakout board for the Analog Device’s ADXL345 triple axis accelerometer. The module is populated with MOSFET based Voltage level conversion circuitry to enable you to interface different type of microcontrollers (3V3 & 5V). Apart from the above all, necessary components like decoupling capacitors ,filter capacitors ,pull up resistors and LED are also …
-
Bluetooth Stereo Adapter Audio Receiver
₹90.00₹75.00Add to cartBluetooth Stereo audio receiver circuit Board is ultra-small size, easy to embed modified products. Two-channel stereo output, compatible with most of the market power amplifier, home audio and video, car audio and other equipment. High fidelity output circuit, resistance and capacitance isolation, no noise, good sound quality. Technical Specifications: Input Volt – 5 V DC, …
-
CNC Shield V3 3D Printer Expansion Board
₹250.00₹210.00Add to cartThe Arduino CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses opensource firmware on Arduino to control 4 stepper motors using 4 A4988 Stepper drivers,, with this shield and the Arduino you can build all kinds of robotics or CNC projects including CNC routers, laser …
-
Color Sensor Module TCS230, 3V-5V Red
₹389.00₹350.00Add to cartThis breakout board is a color sensor based on TAOS TCS230 programmable color light to frequency converter which combines configurable silicon photodiodes and a current –to-frequency convertor on single monolithic CMOS integrated circuit. The light-to-frequency converter reads 8X8 array of photodiodes, each array could filter red, green, blue light or clear from the light source …
-
Current Sensor Module 20A (ACS712 )
₹260.00₹245.00Add to cartACS712 Current Sensor Module 20A provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection. The device consists of a precise, low-offset, …
-
DHT11 Temperature and Humidity Sensor Module
₹139.00₹135.00Add to cartThe sensor module is including resistivity humidity sensing component and NTC temperature testing. The compatible digital temperature humidity sensor module is component and connected with 8-byte MCU. This is useful module is fast response, great anti-interference ability and durable. Technical Specifications: Sensor including restive humidity sensing component and NTC temperature testing component and connect with 8-byte …
-
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control-3 Channel
₹240.00₹210.00Add to cartDIGITAL MULTI SERVO TESTER ESC RC CONSISTENCY CCPM MASTER SPEED CONTROL can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on. You can also connect 1-3 ESC to test and compare their reaction time respectively. It can connect 3 servos of the CCPM helicopters and select servos. It can also …
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control-3 ChannelRead More
-
DPDT Switch Board Toggle Type
₹120.00₹90.00Add to cartThis is a toggle type DPDT switch Board. It is used in robot control like as forward, backward and Turing movement. its handling is very easy. Technical Specifications: Output Voltage: 12 volt Input Voltage: 12 volt Current Up to: 2Amp Package Includes: 1 Piece- DPDT Switch Board Toggle Type
-
DRV8825 Stepper Motor Driver Module with Aluminum Heat Sink
₹220.00₹180.00Add to cartThe DRV8825 Stepper Motor Driver with Aluminum Heat Sink is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver. The module has a pinout and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. …
DRV8825 Stepper Motor Driver Module with Aluminum Heat SinkRead More
-
DS1307 Real Time Clock (RTC) Module
₹150.00₹140.00Add to cartThe DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I²C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with …