Category
- Academic DIY Kits
- Academic Hobby Projects
- Academic Major Projects
- Academic Minor Projects
- Aeromodelling & Drone
- Development Boards
- Electronics- Active Parts
- Electronics- Passive Parts
- Electronics- Sensors
- Electronics– Accessories
- Electronics–Modules
- Mechanical Parts
- Motor, Actuator & Pump
- Robot Accessories
- Supply- Battery, Adopters
- Tools & Equipment
Top rated products
-
Concept of zero turn drive (Tata pixel) ₹9,000.00
-
Servo Motor High Torque-15 kg cm Plastic Gear Gear
₹310.00₹300.00 -
Caster Wheel Boll Type
₹30.00₹25.00 -
ULN2803 IC - Darligton Transistor Array
₹32.00₹25.00 -
Leg To Wheel Transforming Machine ₹12,500.00
Micro DC 3-6V Micro Submersible Pump Mini water pump For Fountain Garden Mini water circulation System DIY project. This is a low cost, small size Submersible Pump Motor which can be operated from a 3 ~ 6V power supply. It can take up to 120 liters per hour with very low current consumption of 220mA. Just connect tube pipe to the motor outlet, submerge it in water and power it. Make sure that the water level is always higher than the motor. Dry run may damage the motor due to heating and it will also produce noise.
Technical Specifications:
- Operating Voltage : 3 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Continuous Working Life : 500 hours
- Driving Mode : DC, Magnetic Driving
- Material : Engineering Plastic
- Outlet Outside Diameter : 7.5 mm
- Outlet Inside Diameter : 5 mm
Package Includes:
- 1 Piece– 3-6Volt DC Submersible Mini Water Pump
Weight | 45 g |
---|
Related products
-
DC 6V 380mA 500mmHg Micro Air Pump
₹290.00₹240.00Add to cartA 6V DC 380mA 500mmHg Micro Air Pump has many applications such as a small blower, home aquariums pumps, gasifies in the medical appliances and for food preservation, etc. Micro-pumps are small and compact, and the working fluid is gaseous. As a result, we find these mainly in micro-negative pressure pumps, micro-gas circulation pumps, wrist-type …
-
DC 6V -12v Mini Air Pump
₹190.00₹160.00Add to cartThis is a DC motor driver air pump or air inflator. This is a small air pump and can be used in any DIY projects like aquariums to supply oxygen. It can be controlled by any controller like Arduino, Raspberry Pi, AVR, PIC or any other controller. The pump is very easy to assemble, interface …
Reviews
There are no reviews yet.