Category
- Academic DIY Kits
- Academic Hobby Projects
- Academic Major Projects
- Academic Minor Projects
- Aeromodelling & Drone
- Development Boards
- Electronics- Active Parts
- Electronics- Passive Parts
- Electronics- Sensors
- Electronics– Accessories
- Electronics–Modules
- Mechanical Parts
- Motor, Actuator & Pump
- Robot Accessories
- Supply- Battery, Adopters
- Tools & Equipment
Top rated products
-
BO Motor-100 RPM with Plastic Gear Side Shaft
₹90.00₹70.00 -
FT232RL / Uart 6 Pin TDI USB To TTL Serial Converter Adapter Module
₹210.00₹140.00 -
DC Geared Motor-3.5 RPM Center Shaft
₹190.00₹175.00 -
TCRT5000 Reflective Infrared Optical Sensor
₹45.00₹35.00 -
Four Wheel Steering System (4WS) ₹7,500.00
This is a linear rack made of high quality plastic. Use it to convert rotational motion from a motor/pulley to linear motion. This rack can be used with all our Mod 1.6 type Pinion Gears, which have compatible pitch. Use different pinion gear sizes to get the required linear speed and torque. Perfect for use in science projects, robotics, etc
The Pinion used the Rack, has a distance of 18 mm in between them. Pinion gears or straight-cut gears are the simplest types of gear. They consist of a cylinder or disk with teeth projecting radially. Though the teeth are not straight-sided, the edge of each tooth is straight and aligned parallel to the axis of rotation. These gears mesh together correctly only if fitted to parallel shafts. No axial thrust is created by the tooth loads. Spur gears are excellent at moderate speeds but tend to be noisy at high speeds.
Rack Specifications:
- Rack Length: 9inch,
- Teeth Pitch : 4 mm,
- Teeth Height: 3mm
- No of Teeth: N/A,
- Material: Nylon,
- Color: Yellow.
Pinion Specifications:
- Shaft Dia: 6mm,
- Pitch Circle Dia: 56 mm,
- No of Teeth: 38,
- Material: Nylon,
- Color: Yellow.
Package Includes:
- 1 Set – 9 inch Rack With 38 Teeth Pinion
Weight | 20 g |
---|---|
Dimensions | 65 × 30 × 65 mm |
Related products
-
9 inch Rack With 25 Teeth Pinion
₹165.00₹150.00Add to cartThis is a linear rack made of high quality plastic. Use it to convert rotational motion from a motor/pulley to linear motion. This rack can be used with all our Mod 1.6 type Pinion Gears, which have compatible pitch. Use different pinion gear sizes to get the required linear speed and torque. Perfect for use …
-
9 inch Rack With 15 Teeth Pinion
₹165.00₹145.00Add to cartThis is a linear rack made of high quality plastic. Use it to convert rotational motion from a motor/pulley to linear motion. This rack can be used with all our Mod 1.6 type Pinion Gears, which have compatible pitch. Use different pinion gear sizes to get the required linear speed and torque. Perfect for use …
-
Spur Gear 56 Teeth with Shaft Dia-6mm, Pitch Circle Dia-80 mm
₹110.00₹95.00Add to cartNylon Spur Gear is Tough and has a good pressure rating. This spur gear, when used in combination with the worm gear, has a distance of 48 mm in between them. Spur gears or straight-cut gears are the simplest types of gear. They consist of a cylinder or disk with teeth projecting radially. Though the …
Spur Gear 56 Teeth with Shaft Dia-6mm, Pitch Circle Dia-80 mmRead More
-
Spur Gear 38 Teeth with Shaft Dia-6mm, Pitch Circle Dia-56 mm
₹85.00₹70.00Add to cartNylon Spur Gear is Tough and has a good pressure rating. This spur gear, when used in combination with the worm gear, has a distance of (xx mm) in between them. Spur gears or straight-cut gears are the simplest types of gear. They consist of a cylinder or disk with teeth projecting radially. Though the …
Spur Gear 38 Teeth with Shaft Dia-6mm, Pitch Circle Dia-56 mmRead More
Reviews
There are no reviews yet.