Top rated products
DHT11 is a temperature and humidity sensor on the single chip. The sensor is a low cost basic digital temperature and humidity sensor. To sense humidity and temperature, it uses a capacitive humidity sensor and a thermistor respectively. It measures the surrounding environment and gives a digital signal at its data pins. As it does not require any analog pin or data, so it’s easy to use, but need to be careful with timing to get data.
Technical Specifications:
- Voltage supply: 3-5V
- Maximum current during conversion: 2.5mA
- Humidity reading: 20-80%
- Humidity accuracy: 5%
- Temperature reading: 0-50°C
- Temperature accuracy: ±2%
- Sampling rate: 1Hz once every second
Pin Description:
- Vcc: 3V to 5V
- Signal: Data
- NC: Not Connected
- GND: Ground
Application:
- Automatic temperature control
- To measure temperature and humidity
- To monitor the environment
- Local weather station
Package Includes:
- 1 Piece-DHT11 Sensor Digital Temperature and Humidity Sensor
| Weight | 4 g |
|---|
Related products
-
Sale!
Thermoelectric Peltier Module (TEC1-12715)
₹275.00Add to cartTEC1-12715 Thermoelectric Cooler 15A Peltier Module uses the Peltier effect to create a heat flux at the junction of two different types of materials. A Peltier cooler, heater, or thermoelectric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other, with consumption of electrical energy, …
-
Sale!
DS18B20 Waterproof Temperature Sensor
₹165.00Add to cartThis is a pre-wired and waterproofed version of the DS18B20 temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don’t get any …
-
Sale!
LM35 Temperature Sensor
₹75.00Add to cartLM35 Temperature Sensor series are precision integrated-circuit temperature devices with an output voltage linearlyproportional to the Centigrade temperature. The LM35 device has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 device does …
Complete Orders.
Reviews
There are no reviews yet.