Category
- Academic DIY Kits
- Academic Hobby Projects
- Academic Major Projects
- Academic Minor Projects
- Aeromodelling & Drone
- Development Boards
- Electronics- Active Parts
- Electronics- Passive Parts
- Electronics- Sensors
- Electronics– Accessories
- Electronics–Modules
- Mechanical Parts
- Motor, Actuator & Pump
- Robot Accessories
- Supply- Battery, Adopters
- Tools & Equipment
Top rated products
-
BO Motor-300 RPM with Plastic Gear Side Shaft
₹90.00₹70.00 -
IR Sensor Module
₹50.00₹45.00 -
DC Geared Motor-10 RPM Center Shaft
₹185.00₹170.00 -
Magnetic Door Switch
₹115.00₹110.00 -
Motorized Scissor Jack with Suspension and Crawler ₹12,500.00
The DS1307 serial real-time clock (RTC) is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially through an I²C, bidirectional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power-sense circuit that detects power failures and automatically switches to the backup supply. Timekeeping operation continues while the part operates from the backup supply. Key Features Completely Manages All Timekeeping Functions Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year Compensation Valid Up to 2100 56-Byte, Battery-Backed, General-Purpose RAM with Unlimited Writes Programmable Square-Wave Output Signal Simple Serial Port Interfaces to Most Microcontrollers I2C Serial Interface Low Power Operation Extends Battery Backup Run Time Consumes Less than 500nA in Battery-Backup Mode with Oscillator Running Automatic Power-Fail Detect and Switch Circuitry 8-Pin DIP and 8-Pin SO Minimizes Required Space Optional Industrial Temperature Range: -40°C to +85°C Supports Operation in a Wide Range of Applications
Technical Specifications:
- Provide clock signal for microcontroller. Cascade other I2C devices
- Memory storage: 24C32 32K I2C EEPROM. With LIR2032 rechargeable lithium battery and rechargeable circuit
- With reading and writing function. Using time: About 1 year (Fully charged)
- With full BCD clock calendar chip of 56byte non-volatile RAM. Address and data transmission via serial cable with dual-line dual-direction. The chip can provide second, minute, hour etc information.. AM/PM mark, for working 24-hour or 12-hour
- DS1307 I2C RTC DS1307 24C32 Real Time Clock Module
Package Includes:
- 1 Piece-DS1307 Real Time Clock (RTC) Module
Weight | 25 g |
---|---|
Dimensions | 25 × 25 × 5 mm |
Related products
-
PS2 Joystick Module Breakout Module
₹180.00₹145.00Add to cartJoystick Module measures position coordination on X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing thumbstick down. This module finds application to control the movement of a robot, positioning an electronically object, etc. it is compatible with …
-
LDR Sensor Module Lm393 Optical Photosensitive
₹120.00₹85.00Add to cartLDR sensor module is used to detect the intensity of light. It is associated with both analog output pin and digital output pin labeled as AO and DO respectively on the board. When there is light, the resistance of LDR will become low according to the intensity of light. The greater the intensity of light, …
-
Adapter Board For NRF24L01 Wireless Module
₹90.00₹80.00Add to cartHaving problem interfacing nrf modules to your 5 volt microcontroller? Then use this Nrf24l01 breakout board which just solves the problem for interfacing nrf24l01 modules with your Arduino or any microcontroller. Technical Specifications : Voltage: 5 Volts It’s for 8 Pin NRF24L01+ Module A simple socket board which is for NRF24L01 wireless module On-board AMS1117-3.3 …
-
PIR Motion Detector Sensor Module (Hc-Sr501 Pyroelectric Infrared)
₹120.00₹110.00Add to cartThe Passive Infrared Sensor (PIR) sensor module is used for motion detection. It can be used as a motion detector for security systems or robotics. It works on 5V DC and gives TTL output which can be directly given to microcontroller or to relay through a transistor. It consists of a pyroelectric sensor and Fresnel lens that …
PIR Motion Detector Sensor Module (Hc-Sr501 Pyroelectric Infrared)Read More
Reviews
There are no reviews yet.