Category
- Academic DIY Kits
- Academic Hobby Projects
- Academic Major Projects
- Academic Minor Projects
- Aeromodelling & Drone
- Development Boards
- Electronics- Active Parts
- Electronics- Passive Parts
- Electronics- Sensors
- Electronics– Accessories
- Electronics–Modules
- Mechanical Parts
- Motor, Actuator & Pump
- Robot Accessories
- Supply- Battery, Adopters
- Tools & Equipment
Top rated products
BC547 is an NPN transistor hence the collector and emitter will be left open (Reverse biased) when the base pin is held at ground and will be closed (Forward biased) when a signal is provided to base pin. BC547 has a gain value of 110 to 800, this value determines the amplification capacity of the transistor. The maximum amount of current that could flow through the Collector pin is 100mA, hence we cannot connect loads that consume more than 100mA using this transistor. To bias a transistor we have to supply current to base pin, this current (IB) should be limited to 5mA. ( Click for wide range of Transistors).
When this transistor is fully biassed then it can allow a maximum of 100mA to flow across the collector and emitter. This stage is called Saturation Region and the typical voltage allowed across the Collector-Emitter (VCE) or Base-Emitter (VBE) could be 200 and 900 mV respectively. When base current is removed the transistor becomes fully off, this stage is called the Cut-off Region and the Base Emitter voltage could be around 660 mV.
Technical Specifications:
- Collector-Emitter Volt (Vceo): 45V
- Collector Current (Ic): 0.1A
- hfe: 110-800 @ 2mA
- Power Dissipation (Ptot): 625mW
- Current-Gain-Bandwidth (ftotal): 300MHz
- Type: NPN
Package Includes:
- 1 Piece-BC547 NPN Transistor
Weight | 2 g |
---|
Related products
-
BC548 NPN Transistor
₹8.00₹4.00Add to cartBC548 is a NPN transistor so the collector and emitter will be left open (Reverse biased) when the base pin is held at ground and will be closed (Forward biased) when a signal is provided to base pin. BC548 has a gain value of 110 to 800, this value determines the amplification capacity of the transistor. The …
-
BC557 PNP Transistor
₹9.00₹4.00Add to cartBC557 is a general purpose transistor and mainly employed for switching and AF (audio frequency) amplifier applications. The BC557 transistor gets on when the Base-Emitter Voltage exceeds 0.55 volts. The Transfer characteristics of the transistor is defined as the relation between the input and output voltage. Technical Specifications: Type: Bi-Polar PNP (BC 557.) Collector–Emitter Voltage …
-
BD140 PNP Bipolar Transistor
₹30.00₹20.00Add to cartBD140 is a three layer NPN or PNP device within the working range, the collector current IC is a function of the base current IB, a change in the base current giving a corresponding amplified change in the collector current for a given collector emitter voltage VCE. Technical Features: Low saturation voltage Simple drive requirements …
Reviews
There are no reviews yet.