Top rated products
-
Arduino Mega 2560 Micro controller Board (Without Cable)
₹1,224.00
-
Tsop Proximity Sensor Module
₹150.00
-
DC Geared Motor-200 RPM Center Shaft
₹140.00
-
TSOP1838 IR Receiver Metal
₹25.00
-
Hydraulics JCB Using Syringe
₹5,000.00
This is a Five IR Sensor Array with Obstacle and Bump Sensor. A 5 IR sensor use with TCRT5000 have a compact construction where the emitting-light source and the detector are arranged in the same direction to sense the presence of an object by using the reflective IR-beam from the object. The operating wavelength is app. 5 cm. The detector consists of a phototransistor. There are 5 sensors connected in an array to form a TCRT 5000 Sensor Module which can be used effectively in different robotic applications such as, Line following robot, Shaft encoder, Obstacle avoidance use.
Technical Specifications:
- Input voltage: 5V DC VCC, GND Pins.
- Output: 5 from TCRT5000 is S1, S2, S3, S4, S5 digital.
- Output: 1 from Bump switch is CLP digital.
- Output: 1 from IR Obstacle sensor Near digital.
Applications:
- Obstacle detector sensor.
- Line follower sensor.
Package Includes:
- 1 Piece- IR Sensor 5 Array with Obstacle and Bump Sensor
| Weight | 25 g |
|---|---|
| Dimensions | 100 × 12 × 6 mm |
Related products
-
Sale!
2 Channel 5V Relay Module
₹165.00Add to cartThis is a 5V, Single Channel Relay interface board; it’s useful to control various appliances, and other equipment’s with large current. It can be controlled directly by any Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, ARM, DSP, MSP430). Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port, or …
-
Sale!
Adapter Board For NRF24L01 Wireless Module
₹80.00Add to cartHaving problem interfacing nrf modules to your 5 volt microcontroller? Then use this Nrf24l01 breakout board which just solves the problem for interfacing nrf24l01 modules with your Arduino or any microcontroller. Technical Specifications : Voltage: 5 Volts It’s for 8 Pin NRF24L01+ Module A simple socket board which is for NRF24L01 wireless module On-board AMS1117-3.3 …
-
Sale!
Tsop Proximity Sensor Module
₹150.00Add to cartThe TSOP 1738 is a member of IR remote control receiver series. This IR sensor module consists of a PIN diode and a preamplifier which are embedded into a single package. The output of TSOP is active low and it gives +5V in off state. When IR waves, from a source, with a center frequency of 38 kHz incident on it, …
-
Sale!
RF 433 MHz Transmitter & Receiver Module (Only RF)
₹150.00Add to cartThis hybrid RF Module (Transceiver) module provides a complete RF transmitter and receiver module solution which can be used to transmit data at up to 3 KHz from any standard CMOS/TTL source. The transmitter module is very simple to operate and offers low current consumption (typical. 11mA). Data can be supplied directly from a microprocessor or …
Complete Orders.
Reviews
There are no reviews yet.