Category
- Academic DIY Kits
- Academic Hobby Projects
- Academic Major Projects
- Academic Minor Projects
- Aeromodelling & Drone
- Development Boards
- Electronics- Active Parts
- Electronics- Passive Parts
- Electronics- Sensors
- Electronics– Accessories
- Electronics–Modules
- Mechanical Parts
- Motor, Actuator & Pump
- Robot Accessories
- Supply- Battery, Adopters
- Tools & Equipment
Top rated products
-
DPDT Self-Lock lock VTR Push Switch-6Pin
₹8.00₹5.00 -
Raspberry Pi HDMI to HDMI Cable
₹180.00₹170.00 -
USB Type A Female Connector
₹14.00₹8.00 -
0.5~3mm, 3.17mm Shank Metal Drill Chuck Collet Bits Rotary with Screw
₹200.00₹160.00 -
Bench Tapping Machine ₹5,000.00
MPU6050 module uses the popular MPU6050 Sensor which includes both a 3 axis accelerometer and a 3 axis gyroscope in a single package. The sensor can be interfaced through a I2C connection which allows an easy and direct interface between the sensor and a microcontroller.
The MPU-6000/MPU-6050 family of parts are the world’s first and only 6-axis Motion Tracking devices designed for the low power, low cost, and high-performance requirements of smartphones, tablets and wearable sensors.
The 6 Degree of Freedom sensor breakout integrates with the MPU6050 sensor and the low noise 3.3v regulator and pull-up resistors for the I2C bus. So it’s available to directly hook up the sensor with the Arduino processors for your robotics, HCI and wearable projects.
Technical Specifications:
- Uses the popular MPU6050 IC
- MPU6050 contains a 3 axis Accelerometer and Gyroscope in a single package and simplifies design and usage. It also reduces cross-axis alignment issues unlike other sensors with separate accelerometer and gyroscope ICs
- Digital I2C interface to read the output of the sensor
- Input Voltage: 2.3 – 3.4V
- Selectable Solder Jumpers on CLK, FSYNC and AD0
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full-scale range of ±2g, ±4g, ±8g and ±16g
- Embedded algorithms for run-time bias and compass calibration. No user intervention required
- Digital-output temperature sensor
Package Includes:
- 1 Piece – MPU6050 – Triple Axis Gyro Accelerometer Module
Weight | 5 g |
---|
Related products
-
MPU-9250 – 9-Axis Gyro Accelerometer Module
₹830.00₹820.00Add to cartThe MPU-9250 is a 9-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor™ (DMP) all in a small 3x3x1mm package available as a pin-compatible upgrade from the MPU-6515. With its dedicated I2C sensor bus, the MPU-9250 directly provides complete 9-axis MotionFusion™ output. The MPU-9250 MotionTracking device, …
-
2 Channel 5V Relay Module
₹180.00₹165.00Add to cartThis is a 5V, Single Channel Relay interface board; it’s useful to control various appliances, and other equipment’s with large current. It can be controlled directly by any Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, ARM, DSP, MSP430). Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port, or …
-
Tsop Proximity Sensor Module
₹180.00₹150.00Add to cartThe TSOP 1738 is a member of IR remote control receiver series. This IR sensor module consists of a PIN diode and a preamplifier which are embedded into a single package. The output of TSOP is active low and it gives +5V in off state. When IR waves, from a source, with a center frequency of 38 kHz incident on it, …
-
LDR Sensor Module Lm393 Optical Photosensitive
₹120.00₹85.00Add to cartLDR sensor module is used to detect the intensity of light. It is associated with both analog output pin and digital output pin labeled as AO and DO respectively on the board. When there is light, the resistance of LDR will become low according to the intensity of light. The greater the intensity of light, …
Reviews
There are no reviews yet.