Top rated products
-
Arduino Mega 2560 Micro controller Board (Without Cable)
₹1,224.00
-
Tsop Proximity Sensor Module
₹150.00
-
DC Geared Motor-200 RPM Center Shaft
₹140.00
-
TSOP1838 IR Receiver Metal
₹25.00
-
Hydraulics JCB Using Syringe
₹5,000.00
TEC1-12715 Thermoelectric Cooler 15A Peltier Module uses the Peltier effect to create a heat flux at the junction of two different types of materials. A Peltier cooler, heater, or thermoelectric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other, with consumption of electrical energy, depending on the direction of the current. Such an instrument is also called a Peltier device, Peltier heat pump, solid-state refrigerator, or thermoelectric cooler (TEC). It can be used either for heating or for cooling,[1] although in practice the main application is cooling. It can also be used as a temperature controller that either heats or cools.
This technology is far less commonly applied to refrigeration than vapor-compression refrigeration is. The primary advantages of a Peltier cooler compared to a vapor-compression refrigerator are its lack of moving parts or circulating liquid, very long life, invulnerability to leaks, small size, and flexible shape. Its main disadvantages are high cost for given cooling capacity and poor power efficiency. Many researchers and companies are trying to develop Peltier coolers that are cheap and efficient.
Technical Specifications:
- Max. Operating Temperature: 90ºC
- Max. Cooling Power (Qmax): 136 W
- Temperature. Difference Max (Delta Tmax) : 70ºC
- Input Voltage Max (Vmax): 15.4 V
- Max. Current (Imax): 15 A
- Resistance: 0.75±0.05 Ω
Package Includes:
- 1 Piece– Thermoelectric Peltier Module (TEC1-12715)
| Weight | 25 g |
|---|---|
| Dimensions | 40 × 40 × 3.6 mm |
Related products
-
Sale!
Tsop Proximity Sensor Module
₹150.00Add to cartThe TSOP 1738 is a member of IR remote control receiver series. This IR sensor module consists of a PIN diode and a preamplifier which are embedded into a single package. The output of TSOP is active low and it gives +5V in off state. When IR waves, from a source, with a center frequency of 38 kHz incident on it, …
-
Sale!
Adapter Board For NRF24L01 Wireless Module
₹80.00Add to cartHaving problem interfacing nrf modules to your 5 volt microcontroller? Then use this Nrf24l01 breakout board which just solves the problem for interfacing nrf24l01 modules with your Arduino or any microcontroller. Technical Specifications : Voltage: 5 Volts It’s for 8 Pin NRF24L01+ Module A simple socket board which is for NRF24L01 wireless module On-board AMS1117-3.3 …
-
Sale!
LDR Sensor Module Lm393 Optical Photosensitive
₹85.00Add to cartLDR sensor module is used to detect the intensity of light. It is associated with both analog output pin and digital output pin labeled as AO and DO respectively on the board. When there is light, the resistance of LDR will become low according to the intensity of light. The greater the intensity of light, …
-
Sale!
Ultrasonic Sensor Module (Distance Measuring Module)
₹130.00Add to cartThis ultrasonic sensor module can be used for measuring distance, object sensor, motion sensors etc. High sensitive module can be used with a microcontroller to integrate with motion circuits to make robotic projects and other distance, position & motion sensitive products. The module sends eight 40 KHz square wave pulses and automatically detects whether it …
Ultrasonic Sensor Module (Distance Measuring Module)Read More
Complete Orders.
Reviews
There are no reviews yet.