Category
- Academic DIY Kits
- Academic Hobby Projects
- Academic Major Projects
- Academic Minor Projects
- Aeromodelling & Drone
- Development Boards
- Electronics- Active Parts
- Electronics- Passive Parts
- Electronics- Sensors
- Electronics– Accessories
- Electronics–Modules
- Mechanical Parts
- Motor, Actuator & Pump
- Robot Accessories
- Supply- Battery, Adopters
- Tools & Equipment
Top rated products
-
Arduino Uno R3 SMD Board (Without Cable)
₹385.00₹350.00 -
PIR Motion Detector Sensor Module (Hc-Sr501 Pyroelectric Infrared)
₹120.00₹110.00 -
DC Geared Motor-60 RPM Center Shaft
₹160.00₹140.00 -
TSOP1738 38kHz IR Distance Sensor Receiver
₹45.00₹40.00 -
Cyclone Separator For Separate Heavy particles
The 1838B is a miniaturised infrared receiver for remote control and other applications requiring improved ambient light rejection. The separate PIN diode and pre-amplifier IC are assembled on a single leadframe. The epoxy package contains a special IR filter. This module has excellent performance even in disturbed ambient light applications and provides protection against uncontrolled output pulses. The reciver can be powered from a 3.3V or 5V supply and with just one data output pin allows it to be easily interfaced with many types of microcontrollers.
Technical Features:
- Photo detector and preamplifier in one package .
- Internal filter for PCM frequency.
- Inner shield,good anti-interference ability.
- High immunity against ambient light
- Improved shielding against electric field disturbance
- 3.0V or 5.0V supply voltage; low power consumption.
- TTL and CMOS compatibility.
- Suitable transmission code: NEC code,RC5 code.
Technical Specifications:
- Model number: 1838B (HCSENS0014)
- Supply voltage: 2.7 to 5.5V
- Supply Current : 0.4 to 1.5mA
- Reception Distance: 18 Meters
- B.P.F Center Frequency: 38KHz
- Reception angle: +/- 45 Degrees
- Typ –3Db bandwidth: 3.3KHz
- VOL (5V Vcc): 0.4V
- VOH (6V Vcc): 4.5V
Package Includes:
- 1 Piece-TSOP1838 IR Receiver Plastic
Weight | 2 g |
---|
Related products
-
IR LED Receiver(RX), Transmitter(TX) Sensor 3 mm-1 Pair
₹12.00₹10.00Add to cartThe Infrared Emitting Diode (IR333C) is a high-intensity diode, molded in a water-clear plastic package. The device is spectrally matched with a phototransistor, photodiode, and an infrared receiver module. Technical Features: High reliability. High radiant intensity. Peak wavelength λp=940nm. 2.54mm Lead spacing. Low forward voltage. Pb Free. This product itself will remain within the RoHS compliant …
IR LED Receiver(RX), Transmitter(TX) Sensor 3 mm-1 PairRead More
-
IR LED Receiver(RX), Transmitter(TX) Sensor 5 mm-1 Pair
₹20.00₹15.00Add to cartThe Infrared Emitting Diode (IR333C) is a high-intensity diode, molded in a water-clear plastic package. The device is spectrally matched with a phototransistor, photodiode, and an infrared receiver module. Technical Features: High reliability. High radiant intensity. Peak wavelength λp=940nm. 2.54mm Lead spacing. Low forward voltage. Pb Free. This product itself will remain within the RoHS …
IR LED Receiver(RX), Transmitter(TX) Sensor 5 mm-1 PairRead More
-
TSOP1838 IR Receiver Metal
₹30.00₹25.00Add to cartThe 1838B is a miniaturised infrared receiver for remote control and other applications requiring improved ambient light rejection. The separate PIN diode and pre-amplifier IC are assembled on a single leadframe. The epoxy package contains a special IR filter. This module has excellent performance even in disturbed ambient light applications and provides protection against uncontrolled …
-
E18-D80NK Infrared Photoelectric Switch -Yellow
₹350.00₹335.00Add to cartThe E18-D80NK Adjustable IR Sensor Proximity Switch 3-80cm Range is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80cm. The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to assemble …
Reviews
There are no reviews yet.