Training
Offers
Robot Chasis
Best Price
Google Review
Voltage Detection Sensor Module-25V
Original price was: ₹ 95.00.₹ 90.00Current price is: ₹ 90.00. (Incl. GST)
Quick Review:
- Voltage input range: DC 0-25V
- Voltage detection range: DC 0.02445V-25V
- Voltage Analog Resolution: 0.00489V
- DC input connector: Terminal cathode connected to VCC, GND negative pole
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
Out of stock
Voltage Sensor is a precise low cost sensor for measuring voltage. It is based on principle of resistive voltage divider design. It can make the red terminal connector input voltage to 5 times smaller. Arduino analog input voltages up to 5V, the voltage detection module input voltage not greater than 5Vx5=25V (if using 3.3V systems, input voltage not greater than 3.3Vx5=16.5V).
Arduino AVR chips have 10-bit AD, so this module simulates a resolution of 0.00489V (5V/1023), so the minimum voltage of input voltage detection module is 0.00489Vx5=0.02445V.
Technical Specifications:
- Voltage input range: DC 0-25V
- Voltage detection range: DC 0.02445V-25V
- Voltage Analog Resolution: 0.00489V
- DC input connector: Terminal cathode connected to VCC, GND negative pole
- Output interface: “+” connect 5/3.3V, “-” connect GND, “s” connect the Arduino AD pins
Package Includes:
- 1 Piece– Voltage Detection Sensor Module-25V
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Â Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin:Â China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
6 reviews for Voltage Detection Sensor Module-25V
Only logged in customers who have purchased this product may leave a review.
Related products
-
30% OFF
A4988 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 128.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Read moreQuick Review:
- simple step and direction control interface
- Short-to-ground and shorted-load protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
49% OFF
1 Channel 5V 10A Relay Module without Optocoupler
Original price was: ₹ 135.00.₹ 69.00Current price is: ₹ 69.00. (Incl. GST)Add to cartQuick Review:
- Control voltage: 5V
- Channels: 1
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:Â
-
10% OFF
1 Channel 5V With H/L Level Trigger Relay Module With Optocoupler
Original price was: ₹ 165.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)Add to cartQuick Review:
- Relay Type : Low-Level Trigger
- Logic Input (V): 3.3 ~ 5
- Trigger Voltage (VDC): 5/12/24
- Switching Voltage (VAC): 250@10A
- Switching Voltage (VDC): 30@10A
- 1 LEDs to indicate when relays are ON.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
15% OFF
L298N Dual Motor Driver Module (Up to 1~2 Amp)
Original price was: ₹ 175.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)Add to cartQuick Review:
- Driving No Of Motor : 2
- Control chip: L298N
- Logical voltage: 5V
- Drive voltage: 5V – 35V
- Logical current: 0mA – 36mA
- Drive current: 2A(MAX single bridge)
- Storage temperature: -20°C to +135°C
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
24% OFF
Mini Motor Drive Shield Expansion Board L293D Module
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00. (Incl. GST)Add to cartQuick Review:
- Input Supply voltage (V):4.5 ~ 25
- Output Current (per channel) (mA): 600
- Peak Output Current (per channel) (mA): 1.2
- Switching Frequency (KHz) :5
- No. of motors controlled by driver: 2
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
14% OFF
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
Original price was: ₹ 1,450.00.₹ 1,245.00Current price is: ₹ 1,245.00. (Incl. GST)Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
40% OFF
L9110S Dual Channel H-Bridge Motor Driver Module
Original price was: ₹ 149.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Add to cartQuick Review:
- Power supply voltage: DC2.5-12V
- Â Each channel has 800mA continuous current output
- Â Low saturation pressure drop
- Â TTL/CMOS output level compatible can be connected directly to the CPU
- Â Control and drive integrated into IC
- Â Have pin high-pressure protection function
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
35% OFF
L293D Multi Motor Driver Shield For Arduino-SLAEX039
Original price was: ₹ 230.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)Add to cartQuick Review:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
Rudra (verified owner) –
The product is firmly packed.
Riaan (verified owner) –
The product is firmly packed.
Shaurya (verified owner) –
Very fast delivery.
Ishaan (verified owner) –
Good quality.
Ishaan (verified owner) –
Very well worth the money.
Sanskrit (verified owner) –
Very fast delivery.