Category
- Arrivals on 2025
- Diy & Stem Education
- Academic Projects
- Development Board
- CNC & 3D Printers
- Refurbished
- Drone / Aeromodelling
- Electronics-Sensors
- Electronics-Modules
- Electronics-Camera
- Electronics-Display Devices
- Active Components
- Passive Components
- Used Parts For Sell
- Cables & Wires
- Robotics Accessories
- Miscellaneous items
- Mechanical Parts
- Motors & Actuators
- Supply- Battery & Chargers
- Tools & Equipment
Offers
Robot Chasis
Best Price
Google Review
NEO-6M GPS Module
₹ 549.00 Original price was: ₹ 549.00.₹ 349.00Current price is: ₹ 349.00. (Incl. GST)
Quick Review:
- Operating Voltage: 3.3V to 5V (can be powered directly by an Arduino or similar development boards).
- Current Consumption: Typically around 50mA (varies depending on signal conditions).
- Interface: UART (RX/TX), compatible with serial communication.
- Output Format: Standard NMEA sentences.
- Update Rate: 1Hz (can be increased with advanced configurations).
- Cold Start Time: Typically 30 seconds.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
3 in stock
3 in stock
2 in stock
1 in stock
The NEO-6M GPS Module is a compact and high-performance GPS receiver module based on the Ublox NEO-6M chipset. It is widely used in navigation, tracking, and location-based projects, providing reliable and accurate GPS data for a variety of applications, such as robotics, drones, vehicle tracking, and IoT projects.
Key Features:
- GPS Receiver: Uses the Ublox NEO-6M GPS chip, which is highly accurate and provides real-time positioning data.
- High Accuracy: Provides 2.5 meters (CEP50) accuracy under good signal conditions.
- Update Rate: Capable of providing 1 Hz (1 update per second) for real-time tracking of position, speed, and time.
- Built-in Antenna: The module comes with a built-in patch antenna, although an external antenna can be connected for better signal reception, especially in weak signal environments.
- Serial Communication: Communicates via UART (Universal Asynchronous Receiver Transmitter), which is compatible with microcontrollers like Arduino, Raspberry Pi, and other development boards.
- Voltage Range: Operates within a voltage range of 3.3V to 5V, making it suitable for a wide range of microcontroller systems.
- Low Power Consumption: Designed for efficient power consumption, making it ideal for battery-powered projects.
- Cold Start: Can achieve a cold start in about 30 seconds and a hot start in around 1 second when it has a previous satellite data stored.
- Position, Speed, and Time Data: Provides longitude, latitude, altitude, speed, and time (UTC), which can be used in various navigation and tracking applications.
How It Works:
- The NEO-6M GPS Module uses a network of satellites in orbit to determine the precise location of the receiver.
- The module receives signals from multiple satellites, calculates the time it took for the signals to reach the receiver, and uses trilateration to compute the latitude, longitude, altitude, and speed.
- The GPS module communicates with external devices (e.g., microcontrollers) via UART, sending GPS data in a standard format, usually NMEA sentences (e.g., GPGGA, GPRMC, etc.).
- The module outputs data such as:
- Latitude and Longitude: Position of the GPS receiver on Earth.
- Altitude: The height above sea level.
- Speed: The current speed of the receiver (in knots, km/h, or mph).
- UTC Time: Current time, as determined by the GPS satellites.
Technical Specifications:
- Operating Voltage: 3.3V to 5V (can be powered directly by an Arduino or similar development boards).
- Current Consumption: Typically around 50mA (varies depending on signal conditions).
- Interface: UART (RX/TX), compatible with serial communication.
- Output Format: Standard NMEA sentences.
- Update Rate: 1Hz (can be increased with advanced configurations).
- Cold Start Time: Typically 30 seconds.
- Hot Start Time: Typically 1 second.
Module Features:
- Built-in Patch Antenna: For standard applications, but you can add an external antenna for better reception.
- Status Indicator: A built-in LED shows the status of GPS reception (flashing indicates the GPS signal is being acquired).
- Compact Size: Small and lightweight, ideal for integration into embedded systems and portable projects.
- Easy to Interface: With Arduino, Raspberry Pi, and other microcontrollers using UART.
The NEO-6M GPS Module is an affordable and highly reliable GPS receiver that is ideal for a wide range of navigation, tracking, and location-based applications. Its compatibility with Arduino, Raspberry Pi, and other microcontrollers makes it a great choice for DIY projects, robotics, and other GPS-based systems.
Applications:
- Navigation Systems: Ideal for use in autonomous vehicles, robots, and drones for position tracking and real-time navigation.
- Location Tracking: Used in tracking devices for personal or vehicle tracking.
- Mapping Projects: Useful for creating maps, geographical data collection, and land surveying.
- IoT Projects: Employed in various Internet of Things (IoT) applications where real-time location tracking is needed.
- Weather Stations: Can be integrated into weather stations for altitude and location-based data collection.
- Time Synchronization: Can be used in systems that require accurate time synchronization based on GPS signals (e.g., time servers).
Package Includes:
- 1 Piece-NEO-6M GPS Module
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Â Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin:Â China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
Only logged in customers who have purchased this product may leave a review.
Related products
-
L293D Multi Motor Driver Shield For Arduino-SLAEX039
₹ 230.00Original price was: ₹ 230.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)Add to cartQuick Review:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
L298N Dual Motor Driver Module (Up to 1~2 Amp)
₹ 175.00Original price was: ₹ 175.00.₹ 150.00Current price is: ₹ 150.00. (Incl. GST)Add to cartQuick Review:
- Driving No Of Motor : 2
- Control chip: L298N
- Logical voltage: 5V
- Drive voltage: 5V – 35V
- Logical current: 0mA – 36mA
- Drive current: 2A(MAX single bridge)
- Storage temperature: -20°C to +135°C
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
4 Channel Isolated 5V 10A Relay Module Optocoupler
₹ 270.00Original price was: ₹ 270.00.₹ 220.00Current price is: ₹ 220.00. (Incl. GST)Add to cartQuick Review:
- Control voltage: 5V
- Channels: 4
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:Â
-
A4988 Stepper Motor Driver Module with Aluminium Heat Sink
₹ 128.00Original price was: ₹ 128.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Add to cartQuick Review:
- simple step and direction control interface
- Short-to-ground and shorted-load protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
8 Channel Isolated 5V 10A Relay Module Optocoupler
₹ 550.00Original price was: ₹ 550.00.₹ 375.00Current price is: ₹ 375.00. (Incl. GST)Add to cartQuick Review:
- Control voltage:Â 5V
- Channels: 8
- Drive Current:Â 15-20mA
- Relay Ratings:Â AC250V 10A ; DC30V 10A
- Indication LED’s for Relay output status
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:Â
-
MB102 3.3V/5V Breadboard Power Supply Module
₹ 95.00Original price was: ₹ 95.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Add to cartQuick Review:
- Power Supply: 3.3V and 5V for breadboard,
- Fits securely:Â standard 400 and 830 points breadboard
- Short circuit protection: Yes
- On-board On/OFF switch to control power supply
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
IR Sensor module Imported
₹ 49.00Original price was: ₹ 49.00.₹ 42.00Current price is: ₹ 42.00. (Incl. GST)Add to cartQuick Review:
- Operating Voltage:Â 5V DC
- Digital Output:Â Logic one (+3.5V DC) /Logic zero (0V DC)
- Mounting Hole of 2.5mm diameter for Easy Mounting.
- This can, in turn, be used for detecting white/black lines (inline follower ROBOTs)or bright/dark objects (in object identification ROBOTs)
- Useful for various Robotic Applications, Room Visitor Counter Systems, etc.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
CNC Shield V3 3D Printer Expansion Board
₹ 249.00Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00. (Incl. GST)Add to cartQuick Review:
- Arduino CNC Shield Version 3
- GRBL 0.9 compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Coolant enable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
Reviews
There are no reviews yet.