Training
Offers
Robot Chasis
Best Price
Google Review
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board
Original price was: ₹ 525.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)
Quick Review:
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
3 in stock
3 in stock
7 in stock
This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10-bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like.
There is a voltage regulator on board, so it can accept up to 12V DC.
The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.
The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.
If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits.
Technical Specifications:
- Model Type: Dev. Board
- Material: Metal
- Board Type: Leonardo
- Chip Type: ATmega32U4
- Input Voltage (V) : 7-12V
- Operating Voltage (VDC): 5
- Input Voltage (limit): 6-20V
- Color: As The Picture Shows.
- Size: 33.1*17.9mm.
- ATMega 32U4 running at 5V/16MHz.
- Supported under IDE v1.0.1.
- On-board micro-USB connector for programming.
- 4 x 10-bit ADC pins.
- 12 x Digital I/Os (5 are PWM capable).
- Rx and Tx Hardware Serial Connections.
Package Includes:
- 1 Piece- Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board
| Weight | 3 g |
|---|---|
| Dimensions | 33.1 × 17.9 × 3 mm |
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin: China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
Only logged in customers who have purchased this product may leave a review.
Related products
-
Arduino Ethernet Shield with SD Slot W5100
Original price was: ₹ 1,449.00.₹ 1,349.00Current price is: ₹ 1,349.00. (Incl. GST)Add to cartQuick Review:
- Ethernet shield with wiznet W5100 ethernet chip
- Supports reading and writing mini SD / TF card
- Direct plug puzzle board, NO soldering needed
- The Ethernet W5100 network expansion module allows the Arduino to be a simple Web server
- With Micro SD card slot, supports SD card up to 2GB, supports 2009, UNO, mega 1280, mega 2560, Nano, Duemilanove.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
ATTINY85 Mini USB Development Board
Original price was: ₹ 119.00.₹ 98.00Current price is: ₹ 98.00. (Incl. GST)Add to cartQuick Review:
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Non-volatile Program and Data Memories
- 512 Bytes In-System Programmable EEPROM
- 512 Bytes Internal SRAM
- USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
- 10-bit ADC
- 4 Single Ended Channels
- Two Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
- Low Power Consumption
- Active Mode:1 MHz, 1.8V: 300 µA
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Aluminum GT2 Timing Idler Pulley For 6mm Belt 20 Tooth 5mm Bore – 1Pcs
Original price was: ₹ 189.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)Add to cartQuick Review:
- Color: Silver
- Inner Diameter (ID): 5mm
- Outer Diameter (OD): 18mm
- No. of Bearings: 2
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Arduino Nano 3D Printer CNC Shield V4 Expansion Board
Original price was: ₹ 249.00.₹ 236.00Current price is: ₹ 236.00. (Incl. GST)Add to cartQuick Review:
- Microcontroller Compatibility: Arduino Nano (ATmega328P)
- Motor Drivers: Supports up to four stepper motor drivers (e.g., A4988, DRV8825)
- Power Input: Voltage: 12V
- Current: Dependent on the connected components and stepper motor drivers
- Stepper Motor Outputs: 4 sets for X, Y, Z, and an additional axis
- End Stop Inputs: 3 sets for X, Y, Z (min and max)
- Thermistor Inputs: 2 sets for monitoring hotend and heated bed temperatures
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Arduino Nano V3.0 (Without Cable)
Original price was: ₹ 340.00.₹ 199.00Current price is: ₹ 199.00. (Incl. GST)Add to cartQuick Review:
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Microcontroller: Atmel ATmega328 SMD Package
- Operating Voltage (logic level): 5 V
- Input Voltage (recommended): 7-12 V
- Input Voltage (limits): 6-20 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
WeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
Original price was: ₹ 249.00.₹ 224.00Current price is: ₹ 224.00. (Incl. GST)Add to cartQuick Review:
- Microcontroller: ESP8266
- Digital I/O Pins: 11
- Operating Voltage(VDC): 3.3
- Analog I/O Pins: 1
- Flash Memory: 4 MB
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Arduino Nano 328P Expansion Adapter Breakout Board I/O Shield
Original price was: ₹ 169.00.₹ 148.00Current price is: ₹ 148.00. (Incl. GST)Add to cartQuick Review:
- Input Voltage(V): 3.3 ~ 5
- No. of Analog Pins: 8
- No. of PWM Pin: 6
- Compatible with Arduino NANO.
- All digital and analog pins breakout.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Arduino Uno R3 SMD Board (Without Cable)
Original price was: ₹ 489.00.₹ 340.00Current price is: ₹ 340.00. (Incl. GST)Add to cartQuick Review:
- Microcontroller: Atmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Reviews
There are no reviews yet.