Training
Offers
Robot Chasis
Best Price
Google Review
BTS7960 43A H-Bridge High-Power Motor Driver Module
Original price was: ₹ 649.00.₹ 449.00Current price is: ₹ 449.00.
Quick Review:
- Overvoltage lockout.
- Undervoltage shut down.
- Driver circuit with logic level inputs.
- Adjustable slew rates for optimized EMI.
- PWM capability of up to 25 kHz combined with active freewheeling.
- Switched mode current limitation for reduced power dissipation in overcurrent.
- Status flag diagnosis with current sense capability.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
4 in stock
4 in stock
23 in stock
13 in stock
The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module is; a fully integrated high current H bridge for motor drive applications using the BTS7960 high current half bridge. the BTS7960 is part of the NovalithICTM family. This containing one p-channel high side MOSFET and one n-channel low side MOSFET; with an integrated driver IC in one package. Due to the p-channel high side switch; the need for a charge pump is eliminated thus minimizing EMI.
Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs; diagnosis with current sense, slew rate adjustment; dead time generation and protection against overtemperature, overvoltage, under voltage; overcurrent, and short circuit.
The Double BTS7960 43A H-Bridge High-Power Stepper Motor Driver Module provides; a cost-optimized solution for protected high current PWM motor drives with very low board space consumption.
Technical Specifications:
- Voltage Rating (V): 6 to 27VDc
- Current Rating (A):43
- Max. Current (A): 43
- Logic Voltage (V): 3.3-5
- Duty cycle: 0 – 100%
- Path resistance (Ω): 16 mΩ at 25°C
- Quiescent Current (uA): 7 µA at 25°C
- Pulse Frequency (KHz): 25
- Overvoltage lockout.
- Undervoltage shut down.
- Driver circuit with logic level inputs.
- Adjustable slew rates for optimized EMI.
- PWM capability of up to 25 kHz combined with active freewheeling.
- Switched mode current limitation for reduced power dissipation in overcurrent.
- Status flag diagnosis with current sense capability.
- Overtemperature shut down with latch behavior.
- 74AHC244 Schmitt-trigger Octal buffer/line driver for ESD protection (Inputs accepts voltages higher than VCC).
Input port:
- RPWM: forward level or PWM signal input, active high.
- LPWM: Reverse level or PWM signal input, active high.
- R_EN: forward drive enable input, high-level enable, low level off.
- L_EN: Reverse drive enable input, high-level enable, low level off.
- R_IS: forward drive current alarm output.
- L_IS: Reverse drive current alarm output.
- VCC: +5 V power output, 5V power supply connection with the microcontroller.
- GND: signal common low end.
Package Includes:
- 1 Piece- BTS7960 43A H-Bridge High-Power Motor Driver Module
| Weight | 67 g |
|---|---|
| Dimensions | 50 × 50 × 43 mm |
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Â Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin:Â China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
Only logged in customers who have purchased this product may leave a review.
Related products
-
Mini Motor Drive Shield Expansion Board L293D Module
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00.Add to cartQuick Review:
- Input Supply voltage (V):4.5 ~ 25
- Output Current (per channel) (mA): 600
- Peak Output Current (per channel) (mA): 1.2
- Switching Frequency (KHz) :5
- No. of motors controlled by driver: 2
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
L293D Dual Motor Driver Module (Up to 1~2 Amp)
Original price was: ₹ 120.00.₹ 85.00Current price is: ₹ 85.00.Read moreQuick Review:
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(Vcc): 4.5V to 7V
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
16 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 750.00.₹ 540.00Current price is: ₹ 540.00. -
5V Step-Up Power Module Lithium Battery Charging Protection Board USB (134N3P)
Original price was: ₹ 95.00.₹ 89.00Current price is: ₹ 89.00.Add to cartQuick Review:
- BAT Discharging Stop Voltage: 2.9V.
- Discharging Efficiency: 85%(input 3.7V output 5V/1A).
- Indication: Charging and discharging
- When charging: red light flashing.
- Fully charged: Red light glows for a long time.
- Integration charging management and discharging management.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
CNC Shield V3 3D Printer Expansion Board
Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00.Add to cartQuick Review:
- Arduino CNC Shield Version 3
- GRBL 0.9 compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Coolant enable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
Rain Sensor Module
Original price was: ₹ 85.00.₹ 75.00Current price is: ₹ 75.00.Add to cartQuick Review:
- Operating Voltage: 3.3V – 5V
- Output Type: Digital and Analog
- Digital Output: High/Low (1/0)
- Analog Output: 0V to VCC (depending on the amount of water detected)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
NE555 Delay Timer Switch Adjustable 0-10 Sec 12V Relay Module
Original price was: ₹ 225.00.₹ 74.00Current price is: ₹ 74.00.Add to cartQuick Review:
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
- Chip: Module based on the NE555 chip.
- Operation: Monostable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
MB102 3.3V/5V Breadboard Power Supply Module
Original price was: ₹ 95.00.₹ 89.00Current price is: ₹ 89.00.Add to cartQuick Review:
- Power Supply: 3.3V and 5V for breadboard,
- Fits securely:Â standard 400 and 830 points breadboard
- Short circuit protection: Yes
- On-board On/OFF switch to control power supply
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
Reviews
There are no reviews yet.