Training
Offers
Robot Chasis
Best Price
Google Review
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
Original price was: ₹ 249.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)
Quick Review:
- Item Type: L293D Motor Driver
- Current Rating (A): 1.2
- Voltage Rating (V): 4.5 to 36
- Motor power supply Range: 4.5V ~ 36V
- Control Voltage Range: 4.5V ~ 9V (10VMAX)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
10 in stock
10 in stock
32 in stock
L293D Motor Driver module is compatible with ESP12E Dev Kit and NodeMCU. This shield board is driven by the power full-bridge chip L293DD which can directly drive 2-channels DC motors or one-channel stepper motor.
In this motor shield board, the IO port of ESP-12E Dev Kit is used as the control port. The logic chip configured inside can finish IC driven. Thus, the shield board has four ports: D1, D2, D3, and D3, which are used as PWMA(motor A), PWMB (motor B), DA (direction of motor A), and DB (direction of motor B), respectively. In addition, this shield board has many pins, such as VIN, 3.3V, DIO, AIO, SDIO, UART, SPI, RST, and EN, thus can conveniently connect all kinds of sensors (e.g., temperature and humidity, buzzer, light, relay sensor, etc.)
Key Features
- ESP12 DEV KIT development board expansion module
- Lead ESP12 DEV KIT all the features of pins: SPI, UART, GPIO, AI, and 3.3V power connector
- Extend two-way motor-driven, two-way direct-drive motor
- onboard power switch
- Motor power, control power separation
Technical Specifications:
- Item Type: L293D Motor Driver
- Current Rating (A): 1.2
- Voltage Rating (V): 4.5 to 36
- Motor power supply Range: 4.5V ~ 36V
- Control Voltage Range: 4.5V ~ 9V (10VMAX)
- Logical Current (mA): ≤60mA
- Drive Current (A): ≤1.2A
- Max. Power (W): 4W
- Drive Type: Dual high-power H-bridge driver
- Operating Temperature (°C): -25 ℃ ~ + 125 ℃
Package Includes:
- 1 Piece-L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
| Weight | 20 g |
|---|---|
| Dimensions | 60 × 45 × 13 mm |
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Â Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin:Â China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
Only logged in customers who have purchased this product may leave a review.
Related products
-
Arduino Uno R3 Dip Board (Without Cable)
Original price was: ₹ 725.00.₹ 549.00Current price is: ₹ 549.00. (Incl. GST)Add to cartQuick Review:
- Microcontroller: Atmega328
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
Arduino Nano 3D Printer CNC Shield V4 Expansion Board
Original price was: ₹ 249.00.₹ 236.00Current price is: ₹ 236.00. (Incl. GST)Add to cartQuick Review:
- Microcontroller Compatibility: Arduino Nano (ATmega328P)
- Motor Drivers: Supports up to four stepper motor drivers (e.g., A4988, DRV8825)
- Power Input: Voltage: 12V
- Current: Dependent on the connected components and stepper motor drivers
- Stepper Motor Outputs: 4 sets for X, Y, Z, and an additional axis
- End Stop Inputs: 3 sets for X, Y, Z (min and max)
- Thermistor Inputs: 2 sets for monitoring hotend and heated bed temperatures
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module
Original price was: ₹ 549.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)Add to cartQuick Review:
- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
- Dimensions : 62.5 x 25.4 x 3 mm.
- Weight : 9 gm.
- Terminal block for power input (or you can use the 0.1″ breakouts on the side)
- Reverse polarity protection on the terminal block input
- Green power-good LED
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
Mini Motor Drive Shield Expansion Board L293D Module
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00. (Incl. GST)Add to cartQuick Review:
- Input Supply voltage (V):4.5 ~ 25
- Output Current (per channel) (mA): 600
- Peak Output Current (per channel) (mA): 1.2
- Switching Frequency (KHz) :5
- No. of motors controlled by driver: 2
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
ULN2003 Stepper Motor Driver Module
Original price was: ₹ 125.00.₹ 59.00Current price is: ₹ 59.00. (Incl. GST)Add to cartQuick Review:
- Motor Driver Chip: ULN2003A
- Power supply: 5-12V
- Signal indicator: 4-way
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
- Chip all the pins already leads for easy connection to use
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
L293D Multi Motor Driver Shield For Arduino-SLAEX039
Original price was: ₹ 230.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)Add to cartQuick Review:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
Arduino Ethernet Shield with SD Slot W5100
Original price was: ₹ 1,449.00.₹ 1,349.00Current price is: ₹ 1,349.00. (Incl. GST)Add to cartQuick Review:
- Ethernet shield with wiznet W5100 ethernet chip
- Supports reading and writing mini SD / TF card
- Direct plug puzzle board, NO soldering needed
- The Ethernet W5100 network expansion module allows the Arduino to be a simple Web server
- With Micro SD card slot, supports SD card up to 2GB, supports 2009, UNO, mega 1280, mega 2560, Nano, Duemilanove.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
GT2 Width 6mm Black Open Timing Belt For 3D Printer – 1Mtr
Original price was: ₹ 149.00.₹ 120.00Current price is: ₹ 120.00. (Incl. GST)Add to cartQuick Review:
- Color: Black
- Shape: Open Loop
- Length: 1Meter
- Pitch (mm): 2mm
- Tooth Height: 0.76
- Belt Height(mm): 1.52
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
Reviews
There are no reviews yet.