Welcome to Ercoms Robotics Store | Lucknow!
Whatsapp Only! +91-8574812609
Sale!

PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module

Original price was: ₹ 549.00.Current price is: ₹ 449.00. (Incl. GST)

Quick Review:

  • This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
  • Dimensions : 62.5 x 25.4 x 3 mm.
  • Weight : 9 gm.
  • Terminal block for power input (or you can use the 0.1″ breakouts on the side)
  • Reverse polarity protection on the terminal block input
  • Green power-good LED

For all Bulk & B2B Product Enquiries

Kindly share your requirements at Contact Us.

Availability: 

1 in stock

Select Below Products to Add Together:
This item: PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module Original price was: ₹ 549.00.Current price is: ₹ 449.00. (Incl. GST) Original price was: ₹ 549.00.Current price is: ₹ 449.00. (Incl. GST)

1 in stock

TowerPro SG90 Mini Servo Motor -180 Degree Rotation Original price was: ₹ 155.00.Current price is: ₹ 128.00. (Incl. GST)

39 in stock

-
+
MG90 Mini Servo Motor -180 Degree - Metal Gear Original price was: ₹ 240.00.Current price is: ₹ 230.00. (Incl. GST)

Out of stock

-
+

If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs,  then the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get a 16-Channel 12-Bit PWM/Servo Driver.

You can control 16 free-running PWM outputs with 16-Channel 12-Bit PWM/Servo Driver using only 2 pins. You can even chain up 62 breakouts to control up to 992 PWM outputs.

It’s an I2C-controlled PWM driver with a built-in clock. That means you do not need to continuously send it to signal to tie up your microcontroller, it is completely free running!

It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs. This is good when you want to control white or blue LEDs with 3.4+ forward voltages. 6 address select pins so you can wire up to 62 of these on a single I2C bus, a total of 992 outputs.

16 Channel PCA9685 12-Bit PWM/Servo Controller, you can control 16 free-running PWM outputs with just two pins. Want to make a robot or hexapod walker ? Maybe you’re making a piece of art with tons of moving parts, or you need to drive a ton of LEDs with precise PWM output. Your microcontroller has a limited number of PWM outputs, and you find yourself running out! Need to run more than 16 PWM outputs? No problem. Chain together up to 62 of these beauties for up to an outstanding 992 PWM outputs.

Technical Specifications:

  • This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
  • Dimensions : 62.5 x 25.4 x 3 mm.
  • Weight : 9 gm.
  • Terminal block for power input (or you can use the 0.1″ breakouts on the side)
  • Reverse polarity protection on the terminal block input
  • Green power-good LED
  • 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1″ so you can only stack 4 next to each other on 0.1″ header
  • “Chain-able” design
  • A spot to place a big capacitor on the V+ line (in case you need it)
  • 220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial
  • Solder jumpers for the 6 address select pins
  • i2c-controlled PWM driver with a built in clock. Unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!
  • It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
  • 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs – that’s a lot of servos or LEDs
  • Adjustable frequency PWM up to about 1.6 KHz
  • 12-bit resolution for each output – for servos, that means about 4us resolution at 60Hz update rate
  • Configurable push-pull or open-drain output
  • Output enable pin to quickly disable all the outputs

Package Includes:

  • 1 Piece- PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module
Weight 12 g

Shipping & Delivery

We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.

Ercoms Warranty

All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects only.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.


**Note: Shipping Charges Applied When Need Replacement or Refund.

Other Info

  • Country of origin: China
  • Brand/Manufacturer: Generic
  • Packer/ Importer: Ercoms Robotics Lab
  • No Warranty/Guarantee Of Chinese Goods.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: 13-ERDRV014 Category: Tags: , , ,

Cart

Your Cart is Empty

Back To Shop