Training
Offers
Robot Chasis
Best Price
Google Review
PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module
Original price was: ₹ 549.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)
Quick Review:
- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
- Dimensions : 62.5 x 25.4 x 3 mm.
- Weight : 9 gm.
- Terminal block for power input (or you can use the 0.1″ breakouts on the side)
- Reverse polarity protection on the terminal block input
- Green power-good LED
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
1 in stock
1 in stock
Out of stock
If you want to make a robot which has lots of moving parts or if you want to control too many LEDs with PWM outputs, then the limited PWM outputs of your microcontroller would be a big problem for you. To overcome this problem, the only thing you should do is to get a 16-Channel 12-Bit PWM/Servo Driver.
You can control 16 free-running PWM outputs with 16-Channel 12-Bit PWM/Servo Driver using only 2 pins. You can even chain up 62 breakouts to control up to 992 PWM outputs.
It’s an I2C-controlled PWM driver with a built-in clock. That means you do not need to continuously send it to signal to tie up your microcontroller, it is completely free running!
It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs. This is good when you want to control white or blue LEDs with 3.4+ forward voltages. 6 address select pins so you can wire up to 62 of these on a single I2C bus, a total of 992 outputs.
16 Channel PCA9685 12-Bit PWM/Servo Controller, you can control 16 free-running PWM outputs with just two pins. Want to make a robot or hexapod walker ? Maybe you’re making a piece of art with tons of moving parts, or you need to drive a ton of LEDs with precise PWM output. Your microcontroller has a limited number of PWM outputs, and you find yourself running out! Need to run more than 16 PWM outputs? No problem. Chain together up to 62 of these beauties for up to an outstanding 992 PWM outputs.
Technical Specifications:
- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
- Dimensions : 62.5 x 25.4 x 3 mm.
- Weight : 9 gm.
- Terminal block for power input (or you can use the 0.1″ breakouts on the side)
- Reverse polarity protection on the terminal block input
- Green power-good LED
- 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1″ so you can only stack 4 next to each other on 0.1″ header
- “Chain-able” design
- A spot to place a big capacitor on the V+ line (in case you need it)
- 220 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial
- Solder jumpers for the 6 address select pins
- i2c-controlled PWM driver with a built in clock. Unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!
- It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)
- 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs – that’s a lot of servos or LEDs
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at 60Hz update rate
- Configurable push-pull or open-drain output
- Output enable pin to quickly disable all the outputs
Package Includes:
- 1 Piece- PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module
| Weight | 12 g |
|---|
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Â Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin:Â China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
Only logged in customers who have purchased this product may leave a review.
Related products
-
CNC Shield V3 3D Printer Expansion Board
Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00. (Incl. GST)Add to cartQuick Review:
- Arduino CNC Shield Version 3
- GRBL 0.9 compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Coolant enable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
L293D Multi Motor Driver Shield For Arduino-SLAEX039
Original price was: ₹ 230.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)Add to cartQuick Review:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
1 Channel 5V 10A Relay Module without Optocoupler
Original price was: ₹ 135.00.₹ 75.00Current price is: ₹ 75.00. (Incl. GST)Add to cartQuick Review:
- Control voltage: 5V
- Channels: 1
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:Â
-
MB102 3.3V/5V Breadboard Power Supply Module
Original price was: ₹ 95.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Add to cartQuick Review:
- Power Supply: 3.3V and 5V for breadboard,
- Fits securely:Â standard 400 and 830 points breadboard
- Short circuit protection: Yes
- On-board On/OFF switch to control power supply
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
IR Sensor module Imported
Original price was: ₹ 49.00.₹ 42.00Current price is: ₹ 42.00. (Incl. GST)Add to cartQuick Review:
- Operating Voltage:Â 5V DC
- Digital Output:Â Logic one (+3.5V DC) /Logic zero (0V DC)
- Mounting Hole of 2.5mm diameter for Easy Mounting.
- This can, in turn, be used for detecting white/black lines (inline follower ROBOTs)or bright/dark objects (in object identification ROBOTs)
- Useful for various Robotic Applications, Room Visitor Counter Systems, etc.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
NE555 Delay Timer Switch Adjustable 0-10 Sec 12V Relay Module
Original price was: ₹ 225.00.₹ 74.00Current price is: ₹ 74.00. (Incl. GST)Add to cartQuick Review:
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
- Chip: Module based on the NE555 chip.
- Operation: Monostable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
2 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 220.00.₹ 135.00Current price is: ₹ 135.00. (Incl. GST)Add to cartQuick Review:
- Control voltage: 5V
- Channels: 2
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:Â
-
8 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 550.00.₹ 375.00Current price is: ₹ 375.00. (Incl. GST)Add to cartQuick Review:
- Control voltage:Â 5V
- Channels: 8
- Drive Current:Â 15-20mA
- Relay Ratings:Â AC250V 10A ; DC30V 10A
- Indication LED’s for Relay output status
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:Â
Reviews
There are no reviews yet.