Training
Offers
Robot Chasis
Best Price
Google Review
Tag: ArduinoCompatible
Showing all 6 resultsSorted by popularity
-
MQ135-Air Quality Gas Sensor Module
Original price was: ₹ 164.00.₹ 134.00Current price is: ₹ 134.00.Add to cartQuick Review:
- Operating Voltage: 5V DC (typical).
- Sensor Resistance: The resistance of the sensor element changes based on the concentration of gases, usually measured in kilo-ohms.
- Sensitivity Range: Detects gases in the range of 10-1000 ppm, depending on the specific gas.
- Response Time: Fast response time (typically a few seconds), although it requires a 1-2 minute warm-up period for accurate readings.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
NEO-6M GPS Module
Original price was: ₹ 549.00.₹ 349.00Current price is: ₹ 349.00.Add to cartQuick Review:
- Operating Voltage: 3.3V to 5V (can be powered directly by an Arduino or similar development boards).
- Current Consumption: Typically around 50mA (varies depending on signal conditions).
- Interface: UART (RX/TX), compatible with serial communication.
- Output Format: Standard NMEA sentences.
- Update Rate: 1Hz (can be increased with advanced configurations).
- Cold Start Time: Typically 30 seconds.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
MQ8-Hydrogen Gas Sensor Module
Original price was: ₹ 165.00.₹ 135.00Current price is: ₹ 135.00.Read moreQuick Review:
- Operating Voltage: 5V DC (typically).
- Sensor Resistance: The resistance of the sensor element changes with gas concentration, usually between a few kΩ and several hundred kΩ.
- Sensitivity Range: Can detect hydrogen gas concentrations from 100 to 10,000 ppm.
- Response Time: The sensor typically responds within a few seconds to changes in gas concentration, but it requires 1-2 minutes of preheating for optimal performance.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
MQ7-Carbon Monoxide (CO) Gas Sensor Module
Original price was: ₹ 240.00.₹ 190.00Current price is: ₹ 190.00.Add to cartQuick Review:
- Operating Voltage: 5V DC (typically).
- Resistance: The resistance of the sensor changes with the concentration of CO, typically measured in kilo-ohms.
- Sensitivity Range: Can detect CO gas concentrations from 10 ppm to 1,000 ppm.
- Response Time: Fast response, usually a few seconds, but the sensor requires 1-2 minutes of preheating for accurate readings.
- Heater Resistance: Around 33Ω (varies slightly depending on manufacturer).
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
MQ5-LPG Natural Gas Sensor Module
Original price was: ₹ 145.00.₹ 134.00Current price is: ₹ 134.00.Read moreQuick Review:
- Operating Voltage: 5V DC
- Heater Resistance: Typically 33Ω
- Sensor Resistance: Varies with the concentration of gas, typically between 10kΩ and 30kΩ
- Response Time: Fast response time, typically a few seconds to detect changes in gas concentration.
- Preheating Time: Requires about 1-2 minutes to stabilize for accurate readings.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
-
MQ6-Gas (LPG/butane) Leakage Sensor Module
Original price was: ₹ 160.00.₹ 146.00Current price is: ₹ 146.00.Read moreQuick Review:
- Operating Voltage: Typically 5V DC.
- Sensor Resistance: The resistance varies based on the gas concentration; typically between 10kΩ and 30kΩ.
- Response Time: Quick response time, typically a few seconds.
- Preheating Time: 1-2 minutes for the sensor to stabilize before it gives accurate readings.
- Sensitivity Range: Detects gas concentrations from 200 to 10,000 ppm.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:Â
