0₹ 0.00

No products in the cart.

Welcome to Ercoms Robotics Store | Lucknow!
My Favourite Wishlist
0₹ 0.00

No products in the cart.

Category

Whatsapp Only! +91-8574812609

Category

Products

Google Review

SPARSH SINGHSPARSH SINGH
12:34 23 Nov 23
Owner is very helpful, supportive and friendly, best experience 💕
Anuj JaiswalAnuj Jaiswal
12:34 23 Nov 23
A nice way of treat with friendly price ....must view for your need!!
Pradeep PatelPradeep Patel
11:33 28 Oct 23
It was awesome experience in ercoms robotics lab .Mr. Ram was an amazing host here would love to visit here again
Dr Ashutosh SrivastavaDr Ashutosh Srivastava
16:56 10 Sep 23
Very professional
Abhimanyu MishraAbhimanyu Mishra
12:48 14 Aug 23
Nice store , very polite stuff
Vinod KumarVinod Kumar
15:50 24 Dec 21
Very good Robotics and electronics products , I have purchased 28 kits of Robotics and some electronics products ,all the products were very good. One thing is very nice that the owner of Ercoms is very supportive. Thank you Ercoms Robotics team for support us.Some images of Robotics after assembling are....
05 Arjun Agarwal05 Arjun Agarwal
14:13 10 Feb 21
A very good place for buying electronic itemsRecently boughtArduino unoUltrasonic sensorBO motorWheelscastor wheelL293DServo motorBattery holderBreadboardjumper wiresThe shopkeeper is very knowledgeable...
js_loader
Sale!
FacebookTwitterWhatsappCopy Link

Arduino Nano 3D Printer CNC Shield V4 Expansion Board

Original price was: ₹ 249.00.Current price is: ₹ 236.00. (Incl. GST)

Quick Review:

  • Microcontroller Compatibility: Arduino Nano (ATmega328P)
  • Motor Drivers: Supports up to four stepper motor drivers (e.g., A4988, DRV8825)
  • Power Input: Voltage: 12V
  • Current: Dependent on the connected components and stepper motor drivers
  • Stepper Motor Outputs: 4 sets for X, Y, Z, and an additional axis
  • End Stop Inputs: 3 sets for X, Y, Z (min and max)
  • Thermistor Inputs: 2 sets for monitoring hotend and heated bed temperatures

For all Bulk & B2B Product Enquiries

Kindly share your requirements at Contact Us.

Availability: 

2 in stock

Select Below Products to Add Together:
This item: Arduino Nano 3D Printer CNC Shield V4 Expansion Board Original price was: ₹ 249.00.Current price is: ₹ 236.00. (Incl. GST) Original price was: ₹ 249.00.Current price is: ₹ 236.00. (Incl. GST)

2 in stock

Arduino Nano V3.0 (Without Cable) Original price was: ₹ 340.00.Current price is: ₹ 199.00. (Incl. GST)

7 in stock

-
+
A4988 Stepper Motor Driver Module with Aluminium Heat Sink Original price was: ₹ 128.00.Current price is: ₹ 89.00. (Incl. GST)

2 in stock

-
+
Compare

The Arduino Nano 3D Printer CNC Shield V4 Expansion Board is an expansion board designed to interface with the Arduino Nano microcontroller, enabling it to control CNC machines or 3D printers. This shield provides an easy way to set up a small-scale CNC machine or 3D printer by integrating stepper motor drivers and other necessary control components.

Key Features

  1. Compatibility: Designed to fit the Arduino Nano.
  2. Stepper Motor Control: Supports up to four stepper motor drivers (A4988, DRV8825, or similar) for controlling X, Y, Z, and an additional axis (like a second Z axis or an extruder for 3D printing).
  3. I/O Pins: Breakout pins for easy access to the Arduino Nano’s I/O pins.
  4. End Stops: Multiple end stop connectors for limit switches to ensure precise movement and homing.
  5. Power Supply: Typically accepts a 12V power supply, suitable for driving stepper motors and other peripherals.
  6. Heaters and Fans: Connectors for heaters (bed and hotend) and fans (for cooling and part cooling).
  7. Expansion Capability: Additional headers for connecting displays, SD card modules, or other peripherals.

Typical Components and Connections

  • Stepper Motor Drivers: Plug into dedicated sockets. Each driver controls one stepper motor and is adjustable for current limiting.
  • End Stop Switches: Connect to the end stop connectors for homing and limits.
  • Power Supply: 12V input for motors and heaters, sometimes 5V for logic if not powered via USB.
  • Heater/Fan Connectors: For connecting heating elements and fans.
  • Additional Connectors: For extruders (in 3D printing applications), display modules, and other peripherals.

Setup Steps

  1. Mount the Arduino Nano: Place the Arduino Nano into the dedicated headers on the shield.
  2. Install Stepper Drivers: Insert stepper motor drivers into their respective slots (be mindful of the orientation).
  3. Connect Stepper Motors: Attach the stepper motors to the output connectors corresponding to the drivers.
  4. Connect End Stops: Plug in the limit switches to the end stop connectors.
  5. Power Connections: Connect the 12V power supply to the shield’s power input.
  6. Heaters and Fans: Connect the heating elements and fans if applicable (for 3D printing setups).
  7. Upload Firmware: Load the appropriate firmware (such as GRBL for CNC or Marlin for 3D printing) onto the Arduino Nano.

Usage Scenarios

  • CNC Machines: Used for controlling small CNC routers, mills, and engravers.
  • 3D Printers: Controls 3D printers, managing the motors, heaters, and sensors required for 3D printing.

Considerations

  • Cooling: Ensure adequate cooling for stepper drivers, especially under heavy loads.
  • Firmware: Use the appropriate firmware that matches your application (CNC or 3D printing) and configure it correctly.
  • Power Supply: Verify that the power supply can handle the combined load of all connected devices (motors, heaters, etc.).

By leveraging the Arduino Nano and this CNC Shield V4 Expansion Board, hobbyists and makers can build and control their own CNC machines or 3D printers with relative ease.

Technical Specifications:

  • Microcontroller Compatibility: Arduino Nano (ATmega328P)
  • Motor Drivers: Supports up to four stepper motor drivers (e.g., A4988, DRV8825)
  • Power Input:
    • Voltage: 12V (common for CNC and 3D printer stepper motors and heaters)
    • Current: Dependent on the connected components and stepper motor drivers
  • Stepper Motor Outputs: 4 sets for X, Y, Z, and an additional axis
  • End Stop Inputs: 3 sets for X, Y, Z (min and max)
  • Heater Outputs:
    • Hotend heater
    • Heated bed (in 3D printer applications)
  • Fan Outputs:
    • Cooling fan
    • Part cooling fan
  • Thermistor Inputs: 2 sets for monitoring hotend and heated bed temperatures
  • Auxiliary Connections:
    • LCD display interface
    • SD card reader interface
    • Additional I/O pins for custom modules and expansions
  • Dimensions: Matches the form factor of the Arduino Nano

Package Includes:

  • 1 Piece- Arduino Nano 3D Printer CNC Shield V4 Expansion Board
Weight 32 g
Dimensions 70 × 60 × 15 mm

Shipping & Delivery

We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.

Ercoms Warranty

All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects.  Reimbursement or replacement will be done against manufacturing defects only.

What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

**Note: Shipping Charges Applied When Need Replacement or Refund.

Other Info

  • Country of origin: China
  • Brand/Manufacturer: Generic
  • Packer/ Importer: Ercoms Robotics Lab
  • No Warranty/Guarantee Of Chinese Goods.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: 17-ERDLP011 Categories: , , Tags: ,

Related products

Cart

Your Cart is Empty

Back To Shop
Payment Details
Sub Total ₹ 0.00

View cartCheckout