Training
Offers
Robot Chasis
Best Price
Google Review
2 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 220.00.₹ 135.00Current price is: ₹ 135.00.
Quick Review:
- Control voltage: 5V
- Channels: 2
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:
25 in stock
25 in stock
26 in stock
8 in stock
This is a 5V, Single Channel Relay interface board; it’s useful to control various appliances, and other equipment’s with large current. It can be controlled directly by any Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, ARM, DSP, MSP430).
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port, or Arduino Uno. This board has two (2) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board very easy. The relay is safely driven by transistor BC547 hence your input device, such as Arduino, is protected from the relay circuit. It serves as an optocoupler isolation board.
Technical Specifications:
- Control voltage: 5V
- Channels: 2
- Drive Current: 15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
- Indication LED’s for Relay output status
Package Includes:
- 1 Piece- 2 Channel Isolated 12V 10A Relay Module Optocoupler
| Weight | 2 g |
|---|
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin: China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
6 reviews for 2 Channel Isolated 5V 10A Relay Module Optocoupler
Only logged in customers who have purchased this product may leave a review.
Related products
-
4 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 270.00.₹ 220.00Current price is: ₹ 220.00.Add to cartQuick Review:
- Control voltage: 5V
- Channels: 4
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:
-
RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield
Original price was: ₹ 575.00.₹ 549.00Current price is: ₹ 549.00.Read moreQuick Review:
- Supply Voltage: 12V
- Standard interfaces (such as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A was added to protect the parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
L298N Dual Motor Driver Module (Up to 1~2 Amp)
Original price was: ₹ 175.00.₹ 149.00Current price is: ₹ 149.00.Add to cartQuick Review:
- Driving No Of Motor : 2
- Control chip: L298N
- Logical voltage: 5V
- Drive voltage: 5V – 35V
- Logical current: 0mA – 36mA
- Drive current: 2A(MAX single bridge)
- Storage temperature: -20°C to +135°C
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
L293D Multi Motor Driver Shield For Arduino-SLAEX039
Original price was: ₹ 230.00.₹ 149.00Current price is: ₹ 149.00.Add to cartQuick Review:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
3 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 240.00.₹ 180.00Current price is: ₹ 180.00.Add to cartQuick Review:
- Control voltage: 5V
- Channels: 3
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:
-
L9110S Dual Channel H-Bridge Motor Driver Module
Original price was: ₹ 149.00.₹ 89.00Current price is: ₹ 89.00.Add to cartQuick Review:
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
CNC Shield V3 3D Printer Expansion Board
Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00.Add to cartQuick Review:
- Arduino CNC Shield Version 3
- GRBL 0.9 compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Coolant enable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 185.00.₹ 89.00Current price is: ₹ 89.00.Read moreQuick Review:
- Micro-step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Ivaan (verified owner) –
The product is firmly packed.
Aarav (verified owner) –
The product is firmly packed.
Aadarsh (verified owner) –
Good quality.
Divyansh (verified owner) –
Very fast delivery.
Vivaan (verified owner) –
Good service.
Aadarsh (verified owner) –
The product is firmly packed.