Training
Offers
Robot Chasis
Best Price
Google Review
TTP223 1-Channel Capacitive Touch Sensor
Original price was: ₹ 35.00.₹ 26.00Current price is: ₹ 26.00. (Incl. GST)
Quick Review:
- Operating Voltage: 2.0 V to 5.5 V
- Current Consumption: < 7 µA
- Start-up Calibration Delay: 0.5 Sec
- PCB Size: 15 x 11 mm
- Low power consumption.
- Power supply: 2 ~ 5.5V DC.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
8 in stock
8 in stock
Out of stock
TTP223 Touch Key Module is based on a touch-sensing IC capacitive touch switch module. A capacitive touch sensor module based on the dedicated TTP223 touch sensor IC. The module provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm.
An on-board LED will give a visual indication of when the sensor is triggered. When triggered the output of the module will switch from its idle low state to high. Solder jumpers allow for reconfiguring its mode of operation to be either active low or toggle output.
Technical Specifications:
- Operating Voltage: 2.0 V to 5.5 V
- Current Consumption: < 7 µA
- Start-up Calibration Delay: 0.5 Sec
- PCB Size: 15 x 11 mm
- Low power consumption.
- Power supply: 2 ~ 5.5V DC.
- Can replace the traditional touch of a button.
- Low Power Mode and Fast Mode
- Simple, easy to use, with Auto Calibration
- Output mode is set by Jumpers
Package Includes:
- 1 Piece–TTP223 1-Channel Capacitive Touch Sensor
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin: China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
6 reviews for TTP223 1-Channel Capacitive Touch Sensor
Only logged in customers who have purchased this product may leave a review.
Related products
-
5% OFF
RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield
Original price was: ₹ 575.00.₹ 549.00Current price is: ₹ 549.00. (Incl. GST)Read moreQuick Review:
- Supply Voltage: 12V
- Standard interfaces (such as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A was added to protect the parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
14% OFF
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
Original price was: ₹ 1,450.00.₹ 1,245.00Current price is: ₹ 1,245.00. (Incl. GST)Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
67% OFF
NE555 Delay Timer Switch Adjustable 0-10 Sec 12V Relay Module
Original price was: ₹ 225.00.₹ 74.00Current price is: ₹ 74.00. (Incl. GST)Add to cartQuick Review:
- Input voltage: DC 12V
- Adjustable time: 0-10 s
- AC Control voltage: 250V/max. 10A
- DC Control Voltage: 30V/max. 10A
- Max. load: 2200W
- Chip: Module based on the NE555 chip.
- Operation: Monostable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
36% OFF
TP4056 (Micro USB) 1A Li-Ion Battery Charging Board with Current Protection
Original price was: ₹ 55.00.₹ 35.00Current price is: ₹ 35.00. (Incl. GST)Add to cartQuick Review:
- Current Protection: Yes
- Inversed polarity: NO.
- Charging method: Linear
- Input Voltage: 4.5-5.5V
- Full Charge Voltage: 4.2V
- Over-Current Protection: 3A
- Under-Voltage Protection: 2.5V
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
52% OFF
DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 185.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Read moreQuick Review:
- Micro-step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
29% OFF
L293D Dual Motor Driver Module (Up to 1~2 Amp)
Original price was: ₹ 120.00.₹ 85.00Current price is: ₹ 85.00. (Incl. GST)Read moreQuick Review:
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(Vcc): 4.5V to 7V
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
11% OFF
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)
Original price was: ₹ 1,850.00.₹ 1,648.00Current price is: ₹ 1,648.00. (Incl. GST)Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Current sense output proportional to motor current
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
34% OFF
CNC Shield V3 3D Printer Expansion Board
Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00. (Incl. GST)Add to cartQuick Review:
- Arduino CNC Shield Version 3
- GRBL 0.9 compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Coolant enable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Advik (verified owner) –
The product is firmly packed.
Rehan (verified owner) –
The product is firmly packed.
Riaan (verified owner) –
Very well worth the money.
Alok (verified owner) –
Very well worth the money.
Riaan (verified owner) –
The product is firmly packed.
Rudra (verified owner) –
The product is firmly packed.