Training
Offers
Robot Chasis
Best Price
Google Review
DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 185.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)
Quick Review:
- Micro-step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Out of stock
The DRV8825 Stepper Motor Driver with Aluminium Heat Sink is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver.
The module has a pin out and interface that are nearly identical to those of the A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications.
The DRV8825 features adjustable current limiting, overcurrent, and over temperature protection, and six micro-step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
Note: We are supplying two DRV8825 Drivers as DRV8825 Stepper Motor Driver with Aluminium Heat Sink- Good Quality and DRV8825 Stepper Motor Driver with Aluminium Heat Sink- Normal Quality. The difference between them is, the good quality DRV8825 has more PCB layers and it features the connecting pins which are of gold plated as compared to others.
Technical Specifications:
- Micro-step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer. Hence lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Exposed solder able ground pad below the driver IC on the bottom of the PCB
Package Includes:
- 1 Piece- DRV8825 Stepper Motor Driver Module
- 1 Piece – Aluminium Heat Sink
| Weight | 3 g |
|---|---|
| Dimensions | 20 × 16 × 12 mm |
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
6 reviews for DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink
Only logged in customers who have purchased this product may leave a review.
Related products
-
11% OFF
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)
Original price was: ₹ 1,850.00.₹ 1,648.00Current price is: ₹ 1,648.00. (Incl. GST)Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Current sense output proportional to motor current
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
53% OFF
ULN2003 Stepper Motor Driver Module
Original price was: ₹ 125.00.₹ 59.00Current price is: ₹ 59.00. (Incl. GST)Add to cartQuick Review:
- Motor Driver Chip: ULN2003A
- Power supply: 5-12V
- Signal indicator: 4-way
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
- Chip all the pins already leads for easy connection to use
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
19% OFF
4 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 270.00.₹ 220.00Current price is: ₹ 220.00. (Incl. GST)Add to cartQuick Review:
- Control voltage: 5V
- Channels: 4
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:
-
12% OFF
Soil Moisture Sensor Module
Original price was: ₹ 85.00.₹ 75.00Current price is: ₹ 75.00. (Incl. GST)Add to cartQuick Review:
- Operating Voltage: 3.3V – 5V
- Output Type: Digital and Analog
- Digital Output: High/Low (1/0) based on moisture threshold
- Analog Output: 0V to VCC (varying voltage based on soil moisture level)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
53% OFF
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control-3 Channel
Original price was: ₹ 399.00.₹ 189.00Current price is: ₹ 189.00. (Incl. GST)Add to cartQuick Review:
- Manual mode: turn the knob with different speeds, check the reaction time.
- Neutral mode: make the servo go back to the neutral point.
- Automatic / window wiper/ mode: make the servo swing like a window wipers in the biggest angle.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
39% OFF
2 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 220.00.₹ 135.00Current price is: ₹ 135.00. (Incl. GST)Add to cartQuick Review:
- Control voltage: 5V
- Channels: 2
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:
-
34% OFF
CNC Shield V3 3D Printer Expansion Board
Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00. (Incl. GST)Add to cartQuick Review:
- Arduino CNC Shield Version 3
- GRBL 0.9 compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Coolant enable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
6% OFF
5V Step-Up Power Module Lithium Battery Charging Protection Board USB (134N3P)
Original price was: ₹ 95.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Add to cartQuick Review:
- BAT Discharging Stop Voltage: 2.9V.
- Discharging Efficiency: 85%(input 3.7V output 5V/1A).
- Indication: Charging and discharging
- When charging: red light flashing.
- Fully charged: Red light glows for a long time.
- Integration charging management and discharging management.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Krishna (verified owner) –
Good quality.
Aditya (verified owner) –
Good service.
Aditya (verified owner) –
Good service.
Ishaan (verified owner) –
The product is firmly packed.
Ivaan (verified owner) –
Good service.
Kabir (verified owner) –
Good quality.