Training
Offers
Robot Chasis
Best Price
Google Review
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control-3 Channel
Original price was: ₹ 399.00.₹ 189.00Current price is: ₹ 189.00.
Quick Review:
- Manual mode: turn the knob with different speeds, check the reaction time.
- Neutral mode: make the servo go back to the neutral point.
- Automatic / window wiper/ mode: make the servo swing like a window wipers in the biggest angle.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
1 in stock
1 in stock
DIGITAL MULTI SERVO TESTER ESC RC CONSISTENCY CCPM MASTER SPEED CONTROL can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on. You can also connect 1-3 ESC to test and compare their reaction time respectively. It can connect 3 servos of the CCPM helicopters and select servos. It can also connect the servo of airplanes to install the steering-box and adjust planes by using such as the neutral mode and so on.
Digital multi servo tester esc RC consistency ccpm master speed control can be used as a signal generator for electric speed controller (ESC), and then you can test your motor system without using a transmitter and receiver.
Technical Specifications:
There are 3 modes to check servos or ESC:
- Manual mode: turn the knob with different speeds, check the reaction time.
- Neutral mode: make the servo go back to the neutral point.
- Automatic / window wiper/ mode: make the servo swing like a window wipers in the biggest angle.
- Digital Multi Servo Tester Esc RC Consistency CCPM Master Speed Control
Package Includes:
- 1 Piece- Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin: China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
6 reviews for Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control-3 Channel
Only logged in customers who have purchased this product may leave a review.
Related products
-
DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 185.00.₹ 89.00Current price is: ₹ 89.00.Read moreQuick Review:
- Micro-step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
A4988 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 128.00.₹ 89.00Current price is: ₹ 89.00.Read moreQuick Review:
- simple step and direction control interface
- Short-to-ground and shorted-load protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Sound Detection Sensor Module
Original price was: ₹ 95.00.₹ 89.00Current price is: ₹ 89.00.Add to cartQuick Review:
- IC Chip: LM393
- Operating Voltage: 3.3V to 5V
- Output: Digital and Analog
- Microphone Type: Electret condenser
- Sensitivity Adjustment: Potentiometer
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
Original price was: ₹ 1,450.00.₹ 1,245.00Current price is: ₹ 1,245.00.Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Motor Driver L293D Module With 7505
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00.Read moreQuick Review:
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(Vcc): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- It can be used to run Two DC motors with the same IC.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
CNC Shield V3 3D Printer Expansion Board
Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00.Add to cartQuick Review:
- Arduino CNC Shield Version 3
- GRBL 0.9 compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Coolant enable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
8 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 550.00.₹ 375.00Current price is: ₹ 375.00.Add to cartQuick Review:
- Control voltage: 5V
- Channels: 8
- Drive Current: 15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
- Indication LED’s for Relay output status
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:
-
L293D Multi Motor Driver Shield For Arduino-SLAEX039
Original price was: ₹ 230.00.₹ 149.00Current price is: ₹ 149.00.Add to cartQuick Review:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Divyansh (verified owner) –
Good quality.
Rehan (verified owner) –
Good quality.
Aarav (verified owner) –
The product is firmly packed.
Kabir (verified owner) –
Good quality.
Kabir (verified owner) –
Good quality.
Siddharth (verified owner) –
Good quality.