Training
Offers
Robot Chasis
Best Price
Google Review
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
Original price was: ₹ 249.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)
Quick Review:
- Item Type: L293D Motor Driver
- Current Rating (A): 1.2
- Voltage Rating (V): 4.5 to 36
- Motor power supply Range: 4.5V ~ 36V
- Control Voltage Range: 4.5V ~ 9V (10VMAX)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
10 in stock
10 in stock
28 in stock
L293D Motor Driver module is compatible with ESP12E Dev Kit and NodeMCU. This shield board is driven by the power full-bridge chip L293DD which can directly drive 2-channels DC motors or one-channel stepper motor.
In this motor shield board, the IO port of ESP-12E Dev Kit is used as the control port. The logic chip configured inside can finish IC driven. Thus, the shield board has four ports: D1, D2, D3, and D3, which are used as PWMA(motor A), PWMB (motor B), DA (direction of motor A), and DB (direction of motor B), respectively. In addition, this shield board has many pins, such as VIN, 3.3V, DIO, AIO, SDIO, UART, SPI, RST, and EN, thus can conveniently connect all kinds of sensors (e.g., temperature and humidity, buzzer, light, relay sensor, etc.)
Key Features
- ESP12 DEV KIT development board expansion module
- Lead ESP12 DEV KIT all the features of pins: SPI, UART, GPIO, AI, and 3.3V power connector
- Extend two-way motor-driven, two-way direct-drive motor
- onboard power switch
- Motor power, control power separation
Technical Specifications:
- Item Type: L293D Motor Driver
- Current Rating (A): 1.2
- Voltage Rating (V): 4.5 to 36
- Motor power supply Range: 4.5V ~ 36V
- Control Voltage Range: 4.5V ~ 9V (10VMAX)
- Logical Current (mA): ≤60mA
- Drive Current (A): ≤1.2A
- Max. Power (W): 4W
- Drive Type: Dual high-power H-bridge driver
- Operating Temperature (°C): -25 ℃ ~ + 125 ℃
Package Includes:
- 1 Piece-L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
| Weight | 20 g |
|---|---|
| Dimensions | 60 × 45 × 13 mm |
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin: China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
Only logged in customers who have purchased this product may leave a review.
Related products
-
21% OFF
Aluminum GT2 Timing Idler Pulley For 6mm Belt 20 Tooth 5mm Bore – 1Pcs
Original price was: ₹ 189.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)Add to cartQuick Review:
- Color: Silver
- Inner Diameter (ID): 5mm
- Outer Diameter (OD): 18mm
- No. of Bearings: 2
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
52% OFF
Aluminum Flexible Coupling Couples Helical Shaft 5 mm x 8 mm
Original price was: ₹ 189.00.₹ 90.00Current price is: ₹ 90.00. (Incl. GST)Read moreQuick Review:
- Color: Black
- Bore Diameter [d1] (mm): 5mm
- Bore Diameter [d2] (mm): 8mm
- Length (mm): 25
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
18% OFF
PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module
Original price was: ₹ 549.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)Add to cartQuick Review:
- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
- Dimensions : 62.5 x 25.4 x 3 mm.
- Weight : 9 gm.
- Terminal block for power input (or you can use the 0.1″ breakouts on the side)
- Reverse polarity protection on the terminal block input
- Green power-good LED
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
31% OFF
DC Motor Remote Control Board [Type 2] 27mhz Four-Channel RC Transmitter and Receiver
Original price was: ₹ 350.00.₹ 240.00Current price is: ₹ 240.00. (Incl. GST)Add to cartQuick Review:
- No of Channel: 4
- Operating Voltage: Voltage: 3.7~6Volt
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
11% OFF
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)
Original price was: ₹ 1,850.00.₹ 1,648.00Current price is: ₹ 1,648.00. (Incl. GST)Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Current sense output proportional to motor current
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
31% OFF
BTS7960 43A H-Bridge High-Power Motor Driver Module
Original price was: ₹ 649.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)Add to cartQuick Review:
- Overvoltage lockout.
- Undervoltage shut down.
- Driver circuit with logic level inputs.
- Adjustable slew rates for optimized EMI.
- PWM capability of up to 25 kHz combined with active freewheeling.
- Switched mode current limitation for reduced power dissipation in overcurrent.
- Status flag diagnosis with current sense capability.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
5% OFF
Arduino Nano 3D Printer CNC Shield V4 Expansion Board
Original price was: ₹ 249.00.₹ 236.00Current price is: ₹ 236.00. (Incl. GST)Add to cartQuick Review:
- Microcontroller Compatibility: Arduino Nano (ATmega328P)
- Motor Drivers: Supports up to four stepper motor drivers (e.g., A4988, DRV8825)
- Power Input: Voltage: 12V
- Current: Dependent on the connected components and stepper motor drivers
- Stepper Motor Outputs: 4 sets for X, Y, Z, and an additional axis
- End Stop Inputs: 3 sets for X, Y, Z (min and max)
- Thermistor Inputs: 2 sets for monitoring hotend and heated bed temperatures
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
24% OFF
Motor Driver L293D Module With 7505
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00. (Incl. GST)Read moreQuick Review:
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(Vcc): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- It can be used to run Two DC motors with the same IC.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
![DC Motor Remote Control Board [Type 2] 27mhz Four-Channel RC Transmitter and Receiver](https://ercoms.com/wp-content/uploads/2024/03/ERDRV015-320x320.jpg)
Reviews
There are no reviews yet.