Training
Offers
Robot Chasis
Best Price
Google Review
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
Original price was: ₹ 249.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)
Quick Review:
- Item Type: L293D Motor Driver
- Current Rating (A): 1.2
- Voltage Rating (V): 4.5 to 36
- Motor power supply Range: 4.5V ~ 36V
- Control Voltage Range: 4.5V ~ 9V (10VMAX)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
10 in stock
10 in stock
28 in stock
L293D Motor Driver module is compatible with ESP12E Dev Kit and NodeMCU. This shield board is driven by the power full-bridge chip L293DD which can directly drive 2-channels DC motors or one-channel stepper motor.
In this motor shield board, the IO port of ESP-12E Dev Kit is used as the control port. The logic chip configured inside can finish IC driven. Thus, the shield board has four ports: D1, D2, D3, and D3, which are used as PWMA(motor A), PWMB (motor B), DA (direction of motor A), and DB (direction of motor B), respectively. In addition, this shield board has many pins, such as VIN, 3.3V, DIO, AIO, SDIO, UART, SPI, RST, and EN, thus can conveniently connect all kinds of sensors (e.g., temperature and humidity, buzzer, light, relay sensor, etc.)
Key Features
- ESP12 DEV KIT development board expansion module
- Lead ESP12 DEV KIT all the features of pins: SPI, UART, GPIO, AI, and 3.3V power connector
- Extend two-way motor-driven, two-way direct-drive motor
- onboard power switch
- Motor power, control power separation
Technical Specifications:
- Item Type: L293D Motor Driver
- Current Rating (A): 1.2
- Voltage Rating (V): 4.5 to 36
- Motor power supply Range: 4.5V ~ 36V
- Control Voltage Range: 4.5V ~ 9V (10VMAX)
- Logical Current (mA): ≤60mA
- Drive Current (A): ≤1.2A
- Max. Power (W): 4W
- Drive Type: Dual high-power H-bridge driver
- Operating Temperature (°C): -25 ℃ ~ + 125 ℃
Package Includes:
- 1 Piece-L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
| Weight | 20 g |
|---|---|
| Dimensions | 60 × 45 × 13 mm |
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin: China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
Only logged in customers who have purchased this product may leave a review.
Related products
-
6% OFF
L298P Motor Driver Shield for Arduino
Original price was: ₹ 899.00.₹ 849.00Current price is: ₹ 849.00. (Incl. GST)Add to cartQuick Review:
- Logical input voltage VD: 5V
- Drive input voltage: VIN 6.5 – 12V, PWR IN 4.8 – 24V
- Logical working current Iss: ≤ 36mA
- Drive working current Io: ≤ 2A
- Maximum power dissipation: 25W (T= 75°C)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
14% OFF
Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board
Original price was: ₹ 525.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)Add to cartQuick Review:
- ATMEGA32U4 running in 5V / 16MHz
- Support Arduino IDE V1.0.1
- Micro USB interface programming on the board
- Four 10-bit ADC pin
- 12 digital I / O (5 PWM capability)
- Rx and Tx hardware serial connection.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
31% OFF
BTS7960 43A H-Bridge High-Power Motor Driver Module
Original price was: ₹ 649.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)Add to cartQuick Review:
- Overvoltage lockout.
- Undervoltage shut down.
- Driver circuit with logic level inputs.
- Adjustable slew rates for optimized EMI.
- PWM capability of up to 25 kHz combined with active freewheeling.
- Switched mode current limitation for reduced power dissipation in overcurrent.
- Status flag diagnosis with current sense capability.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
24% OFF
Mini Motor Drive Shield Expansion Board L293D Module
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00. (Incl. GST)Add to cartQuick Review:
- Input Supply voltage (V):4.5 ~ 25
- Output Current (per channel) (mA): 600
- Peak Output Current (per channel) (mA): 1.2
- Switching Frequency (KHz) :5
- No. of motors controlled by driver: 2
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
30% OFF
A4988 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 128.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Read moreQuick Review:
- simple step and direction control interface
- Short-to-ground and shorted-load protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
31% OFF
DC Motor Remote Control Board [Type 2] 27mhz Four-Channel RC Transmitter and Receiver
Original price was: ₹ 350.00.₹ 240.00Current price is: ₹ 240.00. (Incl. GST)Add to cartQuick Review:
- No of Channel: 4
- Operating Voltage: Voltage: 3.7~6Volt
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
24% OFF
Motor Driver L293D Module With 7505
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00. (Incl. GST)Read moreQuick Review:
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(Vcc): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- It can be used to run Two DC motors with the same IC.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
18% OFF
PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module
Original price was: ₹ 549.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)Add to cartQuick Review:
- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
- Dimensions : 62.5 x 25.4 x 3 mm.
- Weight : 9 gm.
- Terminal block for power input (or you can use the 0.1″ breakouts on the side)
- Reverse polarity protection on the terminal block input
- Green power-good LED
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
![DC Motor Remote Control Board [Type 2] 27mhz Four-Channel RC Transmitter and Receiver](https://ercoms.com/wp-content/uploads/2024/03/ERDRV015-320x320.jpg)
Reviews
There are no reviews yet.