Training
Offers
Robot Chasis
Best Price
Google Review
TTP223B 1-Channel Capacitive Touch Sensor
Original price was: ₹ 75.00.₹ 65.00Current price is: ₹ 65.00.
Quick Review:
- Low power consumption
- Touch Switch Type: Capacitive Touch Switch
- Power supply: 2 ~ 5.5V DC
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
1 in stock
1 in stock
Capacitive Touch Sensor is a very useful addition for projects or applications where a conventional mechanical button or switch is not an ideal choice. This is a simple to use Capacitive Touch Module. It has a digital output which outputs a low signal(0V) by default, and outputs a high signal(5V) whenever you touch the module with your finger. This makes it easy and simple to connect it to an Arduino, Raspberry Pi or any other microcontroller. It can be used in place of a switch to provide inputs to a microcontroller.
Module can be installed behind surfaces such as plastic, glass and non-metallic materials and the button press can still be detected
Technical Specifications:
- Low power consumption
- Touch Switch Type: Capacitive Touch Switch
- Power supply: 2 ~ 5.5V DC
- Can replace the traditional touch of a button
- Four M2 screws positioning holes for easy installation
- Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
- Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
Package Includes:
- 1 Piece–TTP223B 1-Channel Capacitive Touch Sensor
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin: China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
6 reviews for TTP223B 1-Channel Capacitive Touch Sensor
Only logged in customers who have purchased this product may leave a review.
Related products
-
L293D Multi Motor Driver Shield For Arduino-SLAEX039
Original price was: ₹ 230.00.₹ 149.00Current price is: ₹ 149.00.Add to cartQuick Review:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
MB102 3.3V/5V Breadboard Power Supply Module
Original price was: ₹ 95.00.₹ 89.00Current price is: ₹ 89.00.Add to cartQuick Review:
- Power Supply: 3.3V and 5V for breadboard,
- Fits securely: standard 400 and 830 points breadboard
- Short circuit protection: Yes
- On-board On/OFF switch to control power supply
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
A4988 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 128.00.₹ 89.00Current price is: ₹ 89.00.Read moreQuick Review:
- simple step and direction control interface
- Short-to-ground and shorted-load protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
16 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 750.00.₹ 540.00Current price is: ₹ 540.00. -
RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield
Original price was: ₹ 575.00.₹ 549.00Current price is: ₹ 549.00.Read moreQuick Review:
- Supply Voltage: 12V
- Standard interfaces (such as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A was added to protect the parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Motor Driver L293D Module With 7505
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00.Read moreQuick Review:
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(Vcc): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- It can be used to run Two DC motors with the same IC.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Rain Sensor Module
Original price was: ₹ 85.00.₹ 75.00Current price is: ₹ 75.00.Add to cartQuick Review:
- Operating Voltage: 3.3V – 5V
- Output Type: Digital and Analog
- Digital Output: High/Low (1/0)
- Analog Output: 0V to VCC (depending on the amount of water detected)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
IR Sensor module Imported
Original price was: ₹ 49.00.₹ 42.00Current price is: ₹ 42.00.Add to cartQuick Review:
- Operating Voltage: 5V DC
- Digital Output: Logic one (+3.5V DC) /Logic zero (0V DC)
- Mounting Hole of 2.5mm diameter for Easy Mounting.
- This can, in turn, be used for detecting white/black lines (inline follower ROBOTs)or bright/dark objects (in object identification ROBOTs)
- Useful for various Robotic Applications, Room Visitor Counter Systems, etc.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Aarav (verified owner) –
The product is firmly packed.
Alok (verified owner) –
Good quality.
Alok (verified owner) –
Very fast delivery.
Aarav (verified owner) –
The product is firmly packed.
Vivaan (verified owner) –
Very well worth the money.
Dhruv (verified owner) –
Good service.