Training
Offers
Robot Chasis
Best Price
Google Review
LM2596S DC-DC Buck Converter Power Supply
Original price was: ₹ 92.00.₹ 79.00Current price is: ₹ 79.00. (Incl. GST)
Quick Review:
- nput voltage: 4V-35V
- Output voltage: 1.23V to 30V
- Input Current: 3A (maximum)
- Maximum Power Dissipation: 10 watts (Without Heat sink)
- Regulator Type: Step Down ( Non Isolated input to Output )
- Output Current: 2A Rated, ( 3A maximum with heat sink )
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
15 in stock
15 in stock
Finding power supplies for your project can be quite difficult and time consuming, particularly if your project requires a number of components with varying voltages, The DC-DC Buck Converter LM2596s solves this by converting higher voltage to lower voltage without the need for an additional power supply.
This DC to DC Buck Converter LM2596S is a step-down power module with adjustable voltage range, capable of driving a load up to 3A with high efficiency. Using this module with current above 2.5A (or output power greater than 10W), requires the addition of heat-sink to prevent overheating.
If you are looking to increase or step-up the voltage, we have the DC-DC Boost Converter LM2577.
Technical Specifications:
- Input voltage: 4V-35V
- Output voltage: 1.23V to 30V
- Input Current: 3A (maximum)
- Maximum Power Dissipation: 10 watts (Without Heat sink)
- Regulator Type: Step Down ( Non Isolated input to Output )
- Output Current: 2A Rated, ( 3A maximum with heat sink )
- Switching Frequency: 150kHz
- Efficiency: Up to 92% ( when output voltage is set high )
- Dropout Voltage: 2vdc minimum
- Load Regulation: +/- 0.5%
- Voltage Regulation: +/- 2.5%
- Temperature: -40 to +85 deg C ( output power less than 10Watts )
Package Includes:
- 1 Piece–LM2596S DC-DC Buck Converter Power Supply
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin: China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
6 reviews for LM2596S DC-DC Buck Converter Power Supply
Only logged in customers who have purchased this product may leave a review.
Related products
-
52% OFF
DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 185.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Read moreQuick Review:
- Micro-step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
40% OFF
L9110S Dual Channel H-Bridge Motor Driver Module
Original price was: ₹ 149.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Add to cartQuick Review:
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
5% OFF
RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield
Original price was: ₹ 575.00.₹ 549.00Current price is: ₹ 549.00. (Incl. GST)Read moreQuick Review:
- Supply Voltage: 12V
- Standard interfaces (such as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A was added to protect the parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
14% OFF
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
Original price was: ₹ 1,450.00.₹ 1,245.00Current price is: ₹ 1,245.00. (Incl. GST)Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
32% OFF
8 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 550.00.₹ 375.00Current price is: ₹ 375.00. (Incl. GST)Add to cartQuick Review:
- Control voltage: 5V
- Channels: 8
- Drive Current: 15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
- Indication LED’s for Relay output status
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:
-
19% OFF
4 Channel Isolated 5V 10A Relay Module Optocoupler
Original price was: ₹ 270.00.₹ 220.00Current price is: ₹ 220.00. (Incl. GST)Add to cartQuick Review:
- Control voltage: 5V
- Channels: 4
- Drive Current:15-20mA
- Relay Ratings: AC250V 10A ; DC30V 10A
For all Bulk & B2B Product Enquiries.
Kindly share your requirements at E-mail.
Availability:
-
30% OFF
A4988 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 128.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)Read moreQuick Review:
- simple step and direction control interface
- Short-to-ground and shorted-load protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
53% OFF
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control-3 Channel
Original price was: ₹ 399.00.₹ 189.00Current price is: ₹ 189.00. (Incl. GST)Add to cartQuick Review:
- Manual mode: turn the knob with different speeds, check the reaction time.
- Neutral mode: make the servo go back to the neutral point.
- Automatic / window wiper/ mode: make the servo swing like a window wipers in the biggest angle.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Siddharth (verified owner) –
Very fast delivery.
Aadarsh (verified owner) –
Good service.
Vivaan (verified owner) –
Good service.
Riaan (verified owner) –
The product is firmly packed.
Aditya (verified owner) –
Good service.
Aarav (verified owner) –
Good service.