Tag: Motor Driver

Showing all 13 resultsSorted by popularity

• Sale!

  Rated 4.33 out of 5

  L298N Dual Motor Driver Module (Up to 1~2 Amp)

  ₹ 175.00 Original price was: ₹ 175.00.₹ 150.00Current price is: ₹ 150.00. (Incl. GST)

  Quick Review:

  • Driving No Of Motor : 2
  • Control chip: L298N
  • Logical voltage: 5V
  • Drive voltage: 5V – 35V
  • Logical current: 0mA – 36mA
  • Drive current: 2A(MAX single bridge)
  • Storage temperature: -20°C to +135°C

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  Rated 4.33 out of 5

  L293D Multi Motor Driver Shield For Arduino-SLAEX039

  ₹ 230.00 Original price was: ₹ 230.00.₹ 149.00Current price is: ₹ 149.00. (Incl. GST)

  Quick Review:

  • 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
  • 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
  • Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
  • Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  Rated 4.33 out of 5

  Mini Motor Drive Shield Expansion Board L293D Module

  ₹ 125.00 Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00. (Incl. GST)

  Quick Review:

  • Input Supply voltage (V):4.5 ~ 25
  • Output Current (per channel) (mA): 600
  • Peak Output Current (per channel) (mA): 1.2
  • Switching Frequency (KHz) :5
  • No. of motors controlled by driver: 2

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  DC Motor Remote Control Board [Type 2] 27mhz Four-Channel RC Transmitter and Receiver

  ₹ 350.00 Original price was: ₹ 350.00.₹ 240.00Current price is: ₹ 240.00. (Incl. GST)

  Quick Review:

  • No of  Channel: 4
  • Operating Voltage: Voltage: 3.7~6Volt

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  Rated 4.33 out of 5

  Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control-3 Channel

  ₹ 399.00 Original price was: ₹ 399.00.₹ 189.00Current price is: ₹ 189.00. (Incl. GST)

  Quick Review:

  • Manual mode: turn the knob with different speeds, check the reaction time.
  • Neutral mode: make the servo go back to the neutral point.
  • Automatic / window wiper/ mode: make the servo swing like a window wipers in the biggest angle.

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  Rated 4.50 out of 5

  CNC Shield V3 3D Printer Expansion Board

  ₹ 249.00 Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00. (Incl. GST)

  Quick Review:

  • Arduino CNC Shield Version 3
  • GRBL 0.9 compatible.
  • 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)
  • Coolant enable

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  Rated 5.00 out of 5

  ULN2003 Stepper Motor Driver Module

  ₹ 125.00 Original price was: ₹ 125.00.₹ 59.00Current price is: ₹ 59.00. (Incl. GST)

  Quick Review:

  • Motor Driver Chip: ULN2003A
  • Power supply: 5-12V
  • Signal indicator: 4-way
  • Step angle: 5.625 x 1 / 64
  • Reduction ratio: 1 / 64
  • Phase: 4
  • Current / Phase: 5V
  • Chip all the pins already leads for easy connection to use

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  BTS7960 43A H-Bridge High-Power Motor Driver Module

  ₹ 649.00 Original price was: ₹ 649.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)

  Quick Review:

  • Overvoltage lockout.
  • Undervoltage shut down.
  • Driver circuit with logic level inputs.
  • Adjustable slew rates for optimized EMI.
  • PWM capability of up to 25 kHz combined with active freewheeling.
  • Switched mode current limitation for reduced power dissipation in overcurrent.
  • Status flag diagnosis with current sense capability.

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  L298P Motor Driver Shield for Arduino

  ₹ 899.00 Original price was: ₹ 899.00.₹ 849.00Current price is: ₹ 849.00. (Incl. GST)

  Quick Review:

  • Logical input voltage VD: 5V
  • Drive input voltage: VIN 6.5 – 12V, PWR IN 4.8 – 24V
  • Logical working current Iss: ≤ 36mA
  • Drive working current Io: ≤ 2A
  • Maximum power dissipation: 25W (T= 75°C)

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module

  ₹ 549.00 Original price was: ₹ 549.00.₹ 449.00Current price is: ₹ 449.00. (Incl. GST)

  Quick Review:

  • This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
  • Dimensions : 62.5 x 25.4 x 3 mm.
  • Weight : 9 gm.
  • Terminal block for power input (or you can use the 0.1″ breakouts on the side)
  • Reverse polarity protection on the terminal block input
  • Green power-good LED

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  Rated 4.33 out of 5

  DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink

  ₹ 185.00 Original price was: ₹ 185.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)

  Quick Review:

  • Micro-step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
  • Simple step and direction control interface
  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  • 45 V maximum supply voltage

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  Rated 4.67 out of 5

  A4988 Stepper Motor Driver Module with Aluminium Heat Sink

  ₹ 128.00 Original price was: ₹ 128.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)

  Quick Review:

  • simple step and direction control interface
  • Short-to-ground and shorted-load protection
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
  • Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart
• Sale!

  Rated 4.33 out of 5

  L9110S Dual Channel H-Bridge Motor Driver Module

  ₹ 149.00 Original price was: ₹ 149.00.₹ 89.00Current price is: ₹ 89.00. (Incl. GST)

  Quick Review:

  • Power supply voltage: DC2.5-12V
  •  Each channel has 800mA continuous current output
  •  Low saturation pressure drop
  •  TTL/CMOS output level compatible can be connected directly to the CPU
  •  Control and drive integrated into IC
  •  Have pin high-pressure protection function

  For all Bulk & B2B Product Enquiries

  Kindly share your requirements at Contact Us.

  Availability: 

  Add to cart