Training
Offers
Robot Chasis
Best Price
Google Review
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
Original price was: ₹ 1,450.00.₹ 1,245.00Current price is: ₹ 1,245.00.
Quick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Out of stock
VNH2SP30 is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a monolithic high side driver and two low side switches. The high side driver switch is designed using the ST Microelectronics well-known and proven proprietary VI Power M0 technology which permits efficient integration on the same die of a true Power MOSFET with an intelligent signal/protection circuitry. The VIN and motor out are pitched for 5mm screw terminals, making it easy to connect larger gauge wires. INA and INB control the direction of each motor, and the PWM pins turn the motors on or off. For the VNH2SP30, the current sense (CS) pins will output approximately 0.13 volts per amp of output current.
Technical Specifications:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Current sense output proportional to motor current
- Thermal Shutdown
- Under voltage and Overvoltage shutdown
Package Includes:
- 1 Piece-Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
Shipping & Delivery
We try our best to reach each and every corner of India using a few of the best courier services running in the Country such as Delhivery, DTDC, BlueDart, XpressBees, Ecom Express, etc. as per the feedback for the courier partner at the customer’s location. A few of the interior parts of India which are not covered by these courier services are covered by India-Post by us. We apply our best effort on daily basis to dispatch the order the same day it is ordered or within the next 24 hours of the order placed. Most of the orders that are placed before 1 PM are dispatched and shipped the same day. The orders placed post that is scheduled for next day shipment. The same effort is applied throughout the week including weekdays and sometimes weekends and public holidays as well. We facilitate local pickup (self-pickup for the local customers) on the weekdays and partially on weekends also.
Ercoms Warranty
All electronic items are imported, therefore, they do not come with a warranty or guarantee. Rest assured, We meticulously inspect each product before dispatch. In the rare event of any defects, replacements will be provided after a thorough examination.
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Ercoms customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects only.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
**Note: Shipping Charges Applied When Need Replacement or Refund.
Other Info
- Country of origin: China
- Brand/Manufacturer: Generic
- Packer/ Importer: Ercoms Robotics Lab
- No Warranty/Guarantee Of Chinese Goods.
6 reviews for Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
Only logged in customers who have purchased this product may leave a review.
Related products
-
L298N Dual Motor Driver Module (Up to 1~2 Amp)
Original price was: ₹ 175.00.₹ 149.00Current price is: ₹ 149.00.Add to cartQuick Review:
- Driving No Of Motor : 2
- Control chip: L298N
- Logical voltage: 5V
- Drive voltage: 5V – 35V
- Logical current: 0mA – 36mA
- Drive current: 2A(MAX single bridge)
- Storage temperature: -20°C to +135°C
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 185.00.₹ 89.00Current price is: ₹ 89.00.Read moreQuick Review:
- Micro-step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
A4988 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 128.00.₹ 89.00Current price is: ₹ 89.00.Read moreQuick Review:
- simple step and direction control interface
- Short-to-ground and shorted-load protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Mini Motor Drive Shield Expansion Board L293D Module
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00.Add to cartQuick Review:
- Input Supply voltage (V):4.5 ~ 25
- Output Current (per channel) (mA): 600
- Peak Output Current (per channel) (mA): 1.2
- Switching Frequency (KHz) :5
- No. of motors controlled by driver: 2
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Digital Multi Servo Tester ESC CCPM Consistency Master Speed Control-3 Channel
Original price was: ₹ 399.00.₹ 189.00Current price is: ₹ 189.00.Add to cartQuick Review:
- Manual mode: turn the knob with different speeds, check the reaction time.
- Neutral mode: make the servo go back to the neutral point.
- Automatic / window wiper/ mode: make the servo swing like a window wipers in the biggest angle.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
L9110S Dual Channel H-Bridge Motor Driver Module
Original price was: ₹ 149.00.₹ 89.00Current price is: ₹ 89.00.Add to cartQuick Review:
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Motor Driver L293D Module With 7505
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00.Read moreQuick Review:
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(Vcc): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- It can be used to run Two DC motors with the same IC.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
CNC Shield V3 3D Printer Expansion Board
Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00.Add to cartQuick Review:
- Arduino CNC Shield Version 3
- GRBL 0.9 compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Coolant enable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
Veer (verified owner) –
Very fast delivery.
Aarav (verified owner) –
Very well worth the money.
Shaurya (verified owner) –
Good quality.
Arjun (verified owner) –
Very well worth the money.
Arjun (verified owner) –
Very fast delivery.
Advik (verified owner) –
Very well worth the money.