Training
Google Review
It was awesome experience in ercoms robotics lab .Mr. Ram was an amazing host here would love to visit here again
Very good Robotics and electronics products , I have purchased 28 kits of Robotics and some electronics products ,all the products were very good. One thing is very nice that the owner of Ercoms is very supportive. Thank you Ercoms Robotics team for support us.
Some images of Robotics after assembling are....
Some images of Robotics after assembling are....
A very good place for buying electronic items
Recently bought
Arduino uno
Ultrasonic sensor
BO motor
Wheels
castor wheel
L293D
Servo motor
Battery holder
Breadboard
jumper wires
The shopkeeper is very knowledgeable...
Recently bought
Arduino uno
Ultrasonic sensor
BO motor
Wheels
castor wheel
L293D
Servo motor
Battery holder
Breadboard
jumper wires
The shopkeeper is very knowledgeable...
Category: Motor Drivers
-
L298N Dual Motor Driver Module (Up to 1~2 Amp)
Original price was: ₹ 175.00.₹ 149.00Current price is: ₹ 149.00.Add to cart Buy nowQuick Review:
- Driving No Of Motor : 2
- Control chip: L298N
- Logical voltage: 5V
- Drive voltage: 5V – 35V
- Logical current: 0mA – 36mA
- Drive current: 2A(MAX single bridge)
- Storage temperature: -20°C to +135°C
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
L293D Multi Motor Driver Shield For Arduino-SLAEX039
Original price was: ₹ 230.00.₹ 149.00Current price is: ₹ 149.00.Add to cart Buy nowQuick Review:
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
L293D Dual Motor Driver Module (Up to 1~2 Amp)
Original price was: ₹ 120.00.₹ 85.00Current price is: ₹ 85.00.Read moreQuick Review:
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(Vcc): 4.5V to 7V
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Motor Driver L293D Module With 7505
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00.Read moreQuick Review:
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(Vcc): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- It can be used to run Two DC motors with the same IC.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
A4988 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 128.00.₹ 89.00Current price is: ₹ 89.00.Read moreQuick Review:
- simple step and direction control interface
- Short-to-ground and shorted-load protection
- Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Mini Motor Drive Shield Expansion Board L293D Module
Original price was: ₹ 125.00.₹ 95.00Current price is: ₹ 95.00.Add to cart Buy nowQuick Review:
- Input Supply voltage (V):4.5 ~ 25
- Output Current (per channel) (mA): 600
- Peak Output Current (per channel) (mA): 1.2
- Switching Frequency (KHz) :5
- No. of motors controlled by driver: 2
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
DC Motor Remote Control Board [Type 2] 27mhz Four-Channel RC Transmitter and Receiver
Original price was: ₹ 350.00.₹ 240.00Current price is: ₹ 240.00.Add to cart Buy nowQuick Review:
- No of Channel: 4
- Operating Voltage: Voltage: 3.7~6Volt
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
RAMPS 1.4 3D Printer Controller Board Arduino Mega Shield
Original price was: ₹ 575.00.₹ 549.00Current price is: ₹ 549.00.Read moreQuick Review:
- Supply Voltage: 12V
- Standard interfaces (such as that of the extruder)
- Reserved GCI like I2C and RS232
- 3 MOSFET’s are applied to the heater/ fan and thermistor circuit.
- Another 5A was added to protect the parts.
- An 11A fuse is added to the hotbed.
- Support 5 stepper drive board
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
CNC Shield V3 3D Printer Expansion Board
Original price was: ₹ 249.00.₹ 165.00Current price is: ₹ 165.00.Add to cart Buy nowQuick Review:
- Arduino CNC Shield Version 3
- GRBL 0.9 compatible.
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
- Coolant enable
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
ULN2003 Stepper Motor Driver Module
Original price was: ₹ 125.00.₹ 59.00Current price is: ₹ 59.00.Add to cart Buy nowQuick Review:
- Motor Driver Chip: ULN2003A
- Power supply: 5-12V
- Signal indicator: 4-way
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
- Chip all the pins already leads for easy connection to use
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
A3967 Stepper Motor Driver For Arduino
Original price was: ₹ 289.00.₹ 249.00Current price is: ₹ 249.00.Add to cart Buy nowQuick Review:
- Power supply: 7V to 30V.
- The higher the voltage, the higher the torque at high speeds.
- Adjustable current control from 150mA/phase to 750mA/phase.
- Logic voltage: 5V or 3.3V.
- A3967 micro-stepping driver.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
4CH RC Remote Control 27MHz Transmitter & Receiver Board with Antenna
Original price was: ₹ 299.00.₹ 224.00Current price is: ₹ 224.00.Add to cart Buy nowQuick Review:
- No of Channel: 4
- Ideal for Toy Cars
- Compact PCB Design
- Stable Signal Transmission
- Operating Voltage: Voltage: 3.7~6Volt
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
L293D Motor Driver Board for ESP8266 WiFi NodeMcu Lua ESP12E
Original price was: ₹ 249.00.₹ 149.00Current price is: ₹ 149.00.Add to cart Buy nowQuick Review:
- Item Type: L293D Motor Driver
- Current Rating (A): 1.2
- Voltage Rating (V): 4.5 to 36
- Motor power supply Range: 4.5V ~ 36V
- Control Voltage Range: 4.5V ~ 9V (10VMAX)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
BTS7960 43A H-Bridge High-Power Motor Driver Module
Original price was: ₹ 649.00.₹ 449.00Current price is: ₹ 449.00.Add to cart Buy nowQuick Review:
- Overvoltage lockout.
- Undervoltage shut down.
- Driver circuit with logic level inputs.
- Adjustable slew rates for optimized EMI.
- PWM capability of up to 25 kHz combined with active freewheeling.
- Switched mode current limitation for reduced power dissipation in overcurrent.
- Status flag diagnosis with current sense capability.
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
L298P Motor Driver Shield for Arduino
Original price was: ₹ 899.00.₹ 849.00Current price is: ₹ 849.00.Add to cart Buy nowQuick Review:
- Logical input voltage VD: 5V
- Drive input voltage: VIN 6.5 – 12V, PWR IN 4.8 – 24V
- Logical working current Iss: ≤ 36mA
- Drive working current Io: ≤ 2A
- Maximum power dissipation: 25W (T= 75°C)
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Arduino Nano 3D Printer CNC Shield V4 Expansion Board
Original price was: ₹ 249.00.₹ 236.00Current price is: ₹ 236.00.Add to cart Buy nowQuick Review:
- Microcontroller Compatibility: Arduino Nano (ATmega328P)
- Motor Drivers: Supports up to four stepper motor drivers (e.g., A4988, DRV8825)
- Power Input: Voltage: 12V
- Current: Dependent on the connected components and stepper motor drivers
- Stepper Motor Outputs: 4 sets for X, Y, Z, and an additional axis
- End Stop Inputs: 3 sets for X, Y, Z (min and max)
- Thermistor Inputs: 2 sets for monitoring hotend and heated bed temperatures
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
PCA9685 -16 Channel 12-Bit PWM Servo Motor Driver I2C Module
Original price was: ₹ 549.00.₹ 449.00Current price is: ₹ 449.00.Add to cart Buy nowQuick Review:
- This board/chip uses I2C 7-bit address between 0x60-0x80, selectable with jumpers
- Dimensions : 62.5 x 25.4 x 3 mm.
- Weight : 9 gm.
- Terminal block for power input (or you can use the 0.1″ breakouts on the side)
- Reverse polarity protection on the terminal block input
- Green power-good LED
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)
Original price was: ₹ 1,450.00.₹ 1,245.00Current price is: ₹ 1,245.00.Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)
Original price was: ₹ 1,850.00.₹ 1,648.00Current price is: ₹ 1,648.00.Read moreQuick Review:
- Voltage Range: 5.5V – 16V
- Maximum Current rating: 30A
- Practical Continuous Current: 14 A
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Current sense output proportional to motor current
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
DRV8825 Stepper Motor Driver Module with Aluminium Heat Sink
Original price was: ₹ 185.00.₹ 89.00Current price is: ₹ 89.00.Read moreQuick Review:
- Micro-step resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
-
L9110S Dual Channel H-Bridge Motor Driver Module
Original price was: ₹ 149.00.₹ 89.00Current price is: ₹ 89.00.Add to cart Buy nowQuick Review:
- Power supply voltage: DC2.5-12V
- Each channel has 800mA continuous current output
- Low saturation pressure drop
- TTL/CMOS output level compatible can be connected directly to the CPU
- Control and drive integrated into IC
- Have pin high-pressure protection function
For all Bulk & B2B Product Enquiries
Kindly share your requirements at Contact Us.
Availability:
![DC Motor Remote Control Board [Type 2] 27mhz Four-Channel RC Transmitter and Receiver](https://ercoms.com/wp-content/uploads/2024/03/ERDRV015-320x320.jpg)
